List the steps that must be completed before

This preview shows page 3 - 4 out of 4 pages.

3. List the steps that must be completed before selecting a slide for viewing on the HOL V-Scope.-Prior to selecting a slide for viewing: oLocate and select the coarse focus knob. Prior to choosing a new slide, always lower the stage by sliding the ruler indicator to "0."oLocate and select the illuminator on/off switch. Turn the illuminator on by toggling the switch to the "ON" position. oLocate and select theturetToggle the turet control to choose the lower power (4x) objective lens.
The stage should always be lowered before selecting a new slide. See Figure 2 (turret. Coarse focus knob, fine focus knob, stage adjustment knobs, illuminator on/off switch). -ll features highlighted in blue require adjustment from the user in order to successfully view a slide. See Figure 2 (turret. Coarse focus knob, fine focus knob, stage adjustment knobs, illuminator on/off switch). oTheturetcontrols the objective lenses and must be adjusted when viewing a slide at different magnifications. oThe coarse focus knobraises and lowers the microscope stage and is used to initially focus on low power. oThe stage should always be lowered before selecting a new slide. oThe fine focus knobis used to focus an image when viewing a slide with the medium and high power objective lenses. This is the only focus knob required when using these objective lenses. oThe stage adjustment knobs(upper and lower) are used to center the slide on the stage prior to focusing. Use stage adj. knob before using fine focus The upper knob adjusts the stage right and left, and the lower knob moves the stage forward and backward. oThe illuminator on/off switchcontrols the light source. The light source must be turned on before a slide can be viewed.Fig 2 features highlighted in blue require adjustment from theuser in order to successfully view a slide. Figure 2 (turret. Coarse focus knob, fine focus knob, stage adjustment knobs, illuminator on/off switch).The coarse focus knobraises and lowers the microscope stage and is used to initially focus on low powerstage should always be lowered before selecting a new slide. Locate and select the

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture