Specify a cylindricity tolerance of 0005 for the

This preview shows page 6 - 8 out of 8 pages.

15.Specify a cylindricity tolerance of .0005 for the largest cylindrical surface on the part above.ACB16.Datum feature A, in the drawing above, is the primary datum feature. Specify datum feature B perpendicular to datum feature A within .004 and datum feature C perpendicular to datum features A andB within 006.
17.The .500 diameter pin in the drawing above is required to be perpendicular within .002 at MMC to datum feature A. Draw the appropriate feature control frame specifying this requirement.25°AGeometric Dimensioning and Tolerancing for Mechanical DesignMid-term Exam7
18.In the drawing above, specify an angularity tolerance of .005 for the top surface at a 25° angle to datum feature A.19.What is the flatness tolerance for the surface being controlled in the problem above?
20.On the line beneath each toleranced rectangle above, state the tolerance within which the top surface must be parallelto the bottom surface.Geometric Dimensioning and Tolerancing for Mechanical DesignMid-term Exam8

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture