Io board 48v to 127v dc 23 al137 power supply 48v dc

I/O board 48V to 127V DC 2/3
AL137 Power Supply 48V DC nominal input 5/6 *
AL139A Power Supply 110 to 127V DC nominal input 5/6 *
AL139B Power Supply 250V DC nominal input 5/6 *
AL140 Power Supply 24V DC nominal input 5/6 *
AL141 Power Supply 48 to 60V DC nominal input 5/6 *
IR173 G703-6 (2 Mbps) interface On CPU Board
IR179 V11 (32 kbps to 512 kbps) interface On CPU Board
IR180 G703-1 (64 kbps) codirectional interface On CPU Board
IR182-1310
Singlemode optical fibre interface ( λ = 1310 nm,
9/125 μm, core/cladding), Fc/Pc connectors
4
IR182-1550
Singlemode optical fibre interface ( λ = 1550 nm,
9/125 μm, core/cladding), Fc/Pc connectors
4
IR183 Voice Frequency interface On CPU Board
IR184 ** IRIG-B interface optional board On CPU Board
IR185 Short Haul Fibre interface, C37.94 standard, 50 or
62.5 μm Graded index, ST connector (generic term
correct connector = BFOC/2.5)
4
FI002 Filter against capacitive discharge 2
TABLE 2 - DIP 5000 BOARDS
* In order to increase dependability, two power supply modules can be used, with the same
or different input voltage.
** In addition to communication interface
*** France only

DIP5K/EN IT/A22 Main Characteristics
Page 26/38 DIP 5000
8. MAIN CHARACTERISTICS
8.1 Mechanical Characteristics
Dimensions
Height 132 mm (3U)
Width 483 mm (19")
Depth 307 mm or 323 mm
Mass 7.6 kg
Conductor cross-section section on medium
connector
AWG 20 to 22 (0.324 to 0.519 mm²)
Allowable cable diameter on medium access
connector
8.2 mm maximum
Cable for plug in terminal (I/O commands) 0.08 < Section < 2.5 mm²
Protection index IP30
TABLE 3 - MECHANICAL CHARACTERISTICS

Main Characteristics DIP5K/EN IT/A22
DIP 5000 Page 27/38
8.2 Environmental Characteristics
Climatic aspect
Nominal operation range
Temperature -10°C to +55°C
Relative humidity 90% at 23 °C
Operating limits
Temperature -40°C to +70°C
Relative humidity 95% at 40 °C
Storage limits conditions
Temperature -40°C to +85°C
Relative humidity 100% at 23 °C with no condensation
Product Safety
Generic standard EN 60255-5 (2000)/EN60255-27(2005)
Teleprotection Standard IEC 60834-1 (1999)/EN 60834-1 (2000)
Insulation resistance
> 30.10 4 M Ω /500 V
DC
Dielectric tests at 50Hz 2.5 kV on I/O commands
1kV on communication link
Impulse xxxwithstand level ± 5 kV on I/O commands
Earth continuity
< 22 m Ω
EMC Requirements
Compliance with IEC Recommendations
Teleprotection Standard IEC 60834-1 (1999)/EN 60834-1 (2000)
Generic immunity (industrial) IEC 61000-6-2 (2005)
Generic emission (industrial) IEC 61000-6-4 (2006)
Generic immunity (station and substation
environment)
IEC/TS 61000-6-5 (2001)
EMC (Testing)
Electrostatic discharges IEC 61000-4-2(2001) Class 4/
IEC 60255-22-2 (1996)
Radiated electromagnetic field IEC 61000-4-3 (2006) Class 3
Fast transient bursts IEC 61000-4-4 (2004) Class 4/
IEC 60255-22-4 (2002) Class B
Surge immunity IEC 61000-4-5 (2005) Class 3/
IEC 60255-22-5 (2002)
Conducted electromagnetic field IEC 61000-4-6(2006) Class 3/
IEC 60255-22-6 (2001)
Magnetic field IEC 61000-4-8(2001) Class 5
Pulsed magnetic field IEC 61000-4-9(2001) Class 5
Voltage dips, short interruptions and voltage
variations
IEC 61000-4-29 (2000)
Oscillatory waves IEC 61000-4-12(2006) Class 3/
IEC 60255-22-1 (2007)
xxxConducted common mode disturbances IEC 61000-4-16(2002) Class 4/
IEC 60255-22-7 (2003)
TABLE 4 - ENVIRONMENTAL CHARACTERISTICS

DIP5K/EN IT/A22 Main Characteristics
Page 28/38 DIP 5000
8.3 Power Supply Electrical Characteristics
Nominal voltage 24 V
DC
48 V
DC
48/60 V
DC
110/127V
DC
220/250 V
DC
Operating range (V
DC)
18 to 30