Fe80290cfffe67bc42 ip address 1921683121 subnet mask

  • Liberty University
  • CSIS 331
  • Lab Report
  • ProfRam5637
  • 15
  • 100% (3) 3 out of 3 people found this document helpful

This preview shows page 12 - 15 out of 15 pages.

: FE80::290:CFF:FE67:BC42 IP Address ...................... : 192.168.31.21 Subnet Mask ..................... : 255.255.255.0 Default Gateway ................. : 192.168.31.1 DNS Servers ..................... : 10.10.10.11 DHCP Servers .................... : 192.168.31.1 DHCPv6 Client DUID .............. : 00-01-00-01-27-48-1E-D6-00- 90-0C-67-BC-42 2 Verify that PC-C acquired IP information from the DHCP server Connection-specific DNS Suffix..: ccna-sba.com Physical Address ................ : 00D0.D321.C9E1 Link-local IPv6 Address ......... : FE80::2D0:D3FF:FE21:C9E1 IP Address ...................... : 192.168.33.21 Subnet Mask ..................... : 255.255.255.0 Default Gateway ................. : 192.168.33.1 DNS Servers ..................... : 10.10.10.11 DHCP Servers .................... : 192.168.33.1 DHCPv6 Client DUID .............. : 00-01-00-01-6C-1B-4C-B5-00- D0-D3-21-C9-E1 Verify that PC-A can ping PC- C. Note : It may be necessary to disable the PC firewall ping 192.168.33.21 Pinging 192.168.33.21 with 32 bytes of data: Reply from 192.168.33.21: bytes=32 time<1ms TTL=127 Reply from 192.168.33.21: bytes=32 time=3ms TTL=127 Reply from 192.168.33.21: bytes=32 time=3ms TTL=127 Reply from 192.168.33.21: bytes=32 time=3ms TTL=127 Use a Web browser on the Internet PC to access the Web server (209.165.200.229). Login with Username: webuser , Password: cisco12345 The router will not take the ip HTTP server command. Note : Verification of dynamic NAT will be performed in Part 6. Points: _________ of 7 © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 12 of 15
CCNA: Routing and Switching Essentials SA Exam Part 6: Configure and Verify Access Control Lists (ACLs) Total points: 7 Time: 25 minutes Step 1: Restrict access to VTY lines on R2. Configuration Item or Task Specification Points Configure a named access list to only allow R1 to telnet to R2. ACL Name: ADMIN-MGT 1 Apply the named ACL to the VTY lines ip access-class ADMIN-MGT in Verify ACL is working as expected, transport input telnet Step 2: Secure the network from Internet traffic. © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 13 of 15
CCNA: Routing and Switching Essentials SA Exam Configuration Item or Task Specification Points Configure an Extended ACL to: Allow Internet hosts WWW access to the simulated web server on R2 by accessing the static NAT address (209.165.200.229) that you configured in Part 3. Prevent traffic from the Internet from pinging internal networks, while continuing to allow LAN interfaces to ping the Internet PC. ACL No.: 101 access-list 101 permit tcp any 209.165.00.229 0.0.0.31 eq www 3 Apply ACL to the appropriate interface(s) access-list 100 permit tcp any any echo-reply Verify ACL is working as expected From the Internet PC: Ping PC-A (Pings should be unreachable.) Ping PC-C (Pings should be unreachable.) From R1, Ping the Internet PC (Pings should be successful.) Step 3: Enter the appropriate CLI command needed to display the following: Command Description Student Input (command) Points Display the matches an access-list has received since the last reset. Show access-list

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture