Press the SST activation switch and deploy the air bag HINT The airbag deploys

Press the sst activation switch and deploy the air

This preview shows page 27 - 30 out of 40 pages.

(2)Press the SST activation switch and deploy the air-bag. (1) When scrapping a vehicle, deploy the airbag and scrap the vehicle with the front passenger airbag assembly still installed. (2) When moving a vehicle for scrapping which has a front passenger airbag assembly with deployed air- bag, use gloves and safety glasses.
Image of page 27
W03619 AB0163 Wire Harness Diameter Stripped Wire Harness Section W03623 W03624 RS–28 SUPPLEMENTAL RESTRAINT SYSTEM FRONT PASSENGER AIRBAG ASSEMBLY 1372 AuthorĂ: DateĂ: 1997 LEXUS ES300 (RM511U) 2. DEPLOYMENT WHEN DISPOSING OF FRONT PAS- SENGER AIRBAG ASSEMBLY ONLY NOTICE: F When disposing of the front passenger airbag assem- bly only, never use the customers vehicle to deploy the airbag. F Be sure to follow the procedure given below when de- ploying the airbag. HINT: Have a battery ready as the power source to deploy the airbag. (a) Remove the front passenger airbag assembly. (See page RS–22 ) CAUTION: F When removing the front passenger airbag assembly, work must be started after 90 seconds from the time the ignition switch is turned to the ”LOCK” position and the negative (–) terminal cable is disconnected from the battery. F Store the front passenger airbag assembly with the airbag deployment direction facing upward. (b) Fix the front passenger airbag assembly to tire. (1) Using a service–purpose wire harness for the ve- hicle, tie down the front passenger airbag assembly to the tire. Wire harness: Stripped wire harness section 1.25 mm 2 or more (0.0019 in. 2 or more) HINT: To calculate the square of the stripped wire harness section: Square = 3.14 X (Diameter) 2 divided by 4 (2) Install the 4 nuts in the front passenger airbag as- sembly. (3) Remove the 2 nuts and front passenger airbag as- sembly bracket. (4) Wrap the wire harness around the tire, passing the wire harness through the installation holes indi- cated by arrows in the installation.
Image of page 28
R11891 Width Inner Diam. AB0158 Battery SST R09689 Tires (5 or more) R05403 SUPPLEMENTAL RESTRAINT SYSTEM FRONT PASSENGER AIRBAG ASSEMBLY RS–29 1373 AuthorĂ: DateĂ: 1997 LEXUS ES300 (RM511U) (5) Position the front passenger airbag assembly in- side the tire with the airbag deployment direction facing inside. Tire size: Must exceed the following dimensions– Width: 185 mm (7.28 in.) Inner diameter: 360 mm (14.17 in.) CAUTION: F Make sure that the wire harness is tight. It is very dan- gerous if looseness in the wire harness results in the front passenger airbag assembly coming free due to the shock of the airbag deploying.
Image of page 29
Image of page 30

You've reached the end of your free preview.

Want to read all 40 pages?

  • Spring '14
  • Lexus, SST, Airbag Sensor, Airbag Assembly, steering wheel pad

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

Stuck? We have tutors online 24/7 who can help you get unstuck.
A+ icon
Ask Expert Tutors You can ask You can ask You can ask (will expire )
Answers in as fast as 15 minutes