The ideal dc output voltage of a capacitor input filter is equal to a the peak

# The ideal dc output voltage of a capacitor input

• Notes
• 7
• 62% (13) 8 out of 13 people found this document helpful

This preview shows page 5 - 7 out of 7 pages.

22. The ideal dc output voltage of a capacitor-input filter is equal to(a) the peak value of the rectified voltage(b) the average value of the rectified voltage(c) the rms value of the rectified voltage24. A 60 V peak full-wave rectified voltage is applied to a capacitor-input filter. If f = 120 Hz, RL = 10 k Ω, and C = 10 μF, the ripple voltage is26. Line regulation is determined bySection 2–728. A 10 V peak-to-peak sinusoidal voltage is applied across a silicon diode and series resistor. The maximum voltage across the diode is30. In a certain positive clamper circuit, a 120 V rms sine wave is applied to the input. The dc value of the output is(a) 119.3 V(b) 169 V(c) 60 V(d) 75.6 VSection 2–832. If the input voltage to a voltage tripler has an rms value of 12 V, the dc output voltage is approximately
Unit 1 Review AssignmentSection 2–1034. When a silicon diode is open, a DMM will generally indicate36. If one of the diodes in a bridge full-wave rectifier opens, the output is5. Determine whether each silicon diode in Figure 2–92 is forward-biased or reverse-biased.6. Determine the voltage across each diode in Figure 2–92, assuming the practical model.7. Determine the voltage across each diode in Figure 2–92, assuming an ideal diode.8. Determine the voltage across each diode in Figure 2–92, using the complete diode model with rd= 10Ω and rd= 100M Ω.
Unit 1 Review Assignment