Depends on source Input voltage to the ZonicBook618E and to the WBK18 expansion

Depends on source input voltage to the zonicbook618e

This preview shows page 90 - 92 out of 122 pages.

Depends on source Input voltage to the ZonicBook/618E and to the WBK18 expansion modules must be in the range of 10 to 30 VDC and can come from an AC-to-DC adapter or from another source, such as a battery. Available AC-to-DC adapters include the TR-40U, which has an input of 90 to 264 VAC and an output of 3.33 amps @ 15 VDC. Battery options include the DBK30A, DBK34A, and other 10 to 30 VDC sources, such as car batteries. The DBK30A provides 14 VDC and when fully-charged has a storage capacity of 3.4 A hr; car batteries have much higher capacities. The basic formula for battery life is: Runtime (hr) = Battery capacity (A hr) / Current load (A) Battery life and performance depend on various factors including battery type, condition, charge level, and ambient temperature. Be sure you consider these factors, especially when runtime is a critical. Reference Note: For information regarding alternate power supplies, refer to Appendix C , Power Options. 11-6 System Expansion 929795 ZonicBook/618E User’s Manual
Image of page 90
Troubleshooting and Customer Support 12 Electrostatic Discharge (ESD), Handling Notice…… 12-1 Product Care …… 12-1 ReadMe Files and the Install CD-ROM ……12-2 Ethernet Problems …… 12-2 General …… 12-2 Troubleshooting the Ethernet Connection Using the “Ping” Method …… 12-3 Customer Support …… 12-5 Electrostatic Discharge (ESD), Handling Notice The discharge of static electricity can damage some electronic components. Semiconductor devices are especially susceptible to ESD damage. You should always handle components carefully, and you should never touch connector pins or circuit components unless you are following ESD guidelines in an appropriate ESD-controlled area. Such guidelines include the use of properly grounded mats and wrist straps, ESD bags and cartons, and related procedures. Product Care ZonicBook/618E and the WBK18 option are essentially maintenance free and require a minimal amount of care. They should be treated much like other high-tech equipment. In general: The unit should be operated in a ventilated and relatively dust-free environment. At least 2 inches of clearance should be maintained on both vented sides of the chassis to ensure a level of airflow for sufficient cooling. Keep them clear of harsh chemicals and abrasive elements. Avoid exposing the products to extreme heat, for example, avoid setting up a ZonicBook system near a boiler or furnace. Avoid extreme shock and vibration. Avoid subjecting the units to liquids and extremely fine air particulate, such as silica dust. Never touch circuit boards without proper ESD (Electrostatic Discharge) measures in place. The built-in cooling fan uses ambient air to cool the unit internally. An internal build- up of dust and/or other contamination, as well as poor airflow, could have serious impact on the performance of the unit.
Image of page 91
Image of page 92

You've reached the end of your free preview.

Want to read all 122 pages?

  • Summer '20

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

Stuck? We have tutors online 24/7 who can help you get unstuck.
A+ icon
Ask Expert Tutors You can ask You can ask You can ask (will expire )
Answers in as fast as 15 minutes