From the dropdown list select ldap click the radio

This preview shows page 24 - 29 out of 118 pages.

From the dropdown list, select LDAP . Click the radio button to Configure LDAP servers IPs manually .
Page 21 © Copyright 2019 Dell Inc. Lab Exercise: Storage Provisioning DEU I&A Lab Guide - Part 3 Click the Add button. Input the following configuration: IP Address: 192.168.1.51 Click the Add button. Input the following configuration: Port: 389 (already populated) Authentication: Anonymous (already populated) LDAP Secure (Use SSL): unchecked Base DN: hmarine.test Profile DN: (leave blank) Click Next to continue the wizard. 10. In the Configure NAS Server DNS section, check the Enable DNS option. This exposes further configuration information. Input the following configuration: Domain: hmarine.test IP Address: 192.168.1.50 (populated) Click Next to continue the wizard. 11. You will not be configuring Replication so click Next to continue the wizard. The Summary section displays the configuration of the NAS Server to be created as shown.
Page 22 © Copyright 2019 Dell Inc. Lab Exercise: Storage Provisioning DEU I&A Lab Guide - Part 3 Click the Finish button to initiate the creation operation. The Results section displays the status of the creation operation. Close the window when the operation completes successfully. NAS_NFS Server is now listed on the page.
Page 23 © Copyright 2019 Dell Inc. Lab Exercise: Storage Provisioning DEU I&A Lab Guide - Part 3 Creating File Systems 1. You will now configure a file system for SMB file storage. In Unisphere, navigate to Storage > File > File Systems . Click the + icon to create a new file system. A wizard opens for creating the file system. In the Configure the Protocols the File System Supports section, select the Windows Shares (SMB) radio button. From the NAS Server dropdown list, the NAS_SMB should be selected as it is the only NAS Server available configured for SMB. Click Next to continue the wizard. 2. In the Provide a Name and Description section, input the following: Name: SMB_fs Description: File system for NAS_SMB NAS Server Click Next to continue the wizard. 3. In the Configure the File-level Retention section, keep the Off radio button selected. Click Next to continue the wizard. 4. In the Configure the File System Storage Characteristics section, input the following configuration: Pool: FAST VP-2 Size: 5 GB Thin: Checked (default) Tiering Policy: Start High Then Auto-Tier Click Next to continue the wizard. 5. You will not configure a share for the file system at this time so in the
Page 24 © Copyright 2019 Dell Inc. Lab Exercise: Storage Provisioning DEU I&A Lab Guide - Part 3 Configure the Initial Share section click Next to continue the wizard. You will not configure Snapshots for the file system at this time so in the Configure Snapshot Schedule section click Next to continue the wizard. You will not configure Replication for the file system at this time so in the Provide a Replication Mode and RPO section click Next to continue the wizard.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture