Starting with the largest lan determine the size of

This preview shows page 2 - 3 out of 3 pages.

Starting with the largest LAN, determine the size of each subnet you will need for the given host requirement. After the addresses have been determined for all the LAN subnets, assign the first available address space to the WAN link between B1 and HQ. Assign the second available address space to the WAN link between HQ and B2. (Note: Remember that the interfaces of network devices are also host IP addresses and are included in the above addressing requirements.) Step 2: Document the addressing scheme. Use the blank spaces on the topology to record the network addresses in dotted-decimal/slash format. Use the table provided in the printed instructions to document the IP addresses, subnet masks and default gateway addresses. For the LANs, assign the first IP address to the router interface. Assign the last IP address to the PC For the WAN links, assign the first IP address to HQ. Task 2: Select equipment and cable devices. Step 1: Select the necessary equipment. Select the remaining devices you will need and add them to the working space inside Packet Tracer. Use the labels as a guide as to where to place the devices. Step 2: Finish cabling the devices. Cable the networks according to the topology taking care that interfaces match your documentation in Task 1.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture