Required resources 3 routers cisco 1941 with cisco

This preview shows page 2 - 4 out of 6 pages.

Required Resources 3 Routers (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable) 2 Switches (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable) 2 PCs (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term) Console cables to configure the Cisco IOS devices via the console ports Ethernet and serial cables as shown in the topology Part 1: Build the Network and Configure Basic Device Settings In Part 1, you will set up the network topology and configure the routers and switches with basic settings, such as passwords and IP addresses. You will also configure the IP settings for the PCs in the topology. Step 1: Cable the network as shown in the topology. Step 2: Initialize and reload the routers and switches. Step 3: Configure basic settings for each router. a. Disable DNS lookup b. Configure the device name as shown in the topology. c. Assign class as the encrypted privileged EXEC mode password. d. Assign cisco as the console and vty passwords. e. Configure logging synchronous to prevent console messages from interrupting command entry. f. Configure the IP addresses for all the router interfaces according to the Addressing Table. g. Configure the serial DCE interface on R1 and R2 with a clock rate of 128000. h. Configure EIGRP for R1.
Lab - Configuring Basic DHCPv4 on a Router © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 6 R1(config)# router eigrp 1 R1(config-router)# network 192.168.0.0 0.0.0.255 R1(config-router)# network 192.168.1.0 0.0.0.255 R1(config-router)# network 192.168.2.252 0.0.0.3 R1(config-router)# no auto-summary i. Configure EIGRP and a default route to the ISP on R2. R2(config)# router eigrp 1 R2(config-router)# network 192.168.2.252 0.0.0.3 R2(config-router)# redistribute static R2(config-router)# exit R2(config)# ip route 0.0.0.0 0.0.0.0 209.165.200.225 j. Configure a summary static route on ISP to reach the networks on the R1 and R2 routers. ISP(config)# ip route 192.168.0.0 255.255.252.0 209.165.200.226 k. Copy the running configuration to the startup configuration. Step 4: Verify network connectivity between the routers. If any pings between routers fail, correct the errors before proceeding to the next step. Use show ip route and show ip interface brief to locate possible issues. Step 5: Verify the host PCs are configured for DHCP. Part 2: Configure a DHCPv4 Server and a DHCP Relay Agent To automatically assign address information on the network, you will configure R2 as a DHCPv4 server and R1 as a DHCP relay agent.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture