E Issue the show arp command on Router CiscoSystem1 F Issue the show ip route

E issue the show arp command on router ciscosystem1 f

This preview shows page 3 - 6 out of 12 pages.

E. Issue the show arp command on Router CiscoSystem1. F. Issue the show ip route command on Router CiscoSystem2. Q5. You are a network technician at CiscoSystem, Inc. The CiscoSystem network is shown in the following exhibit: You must configure the address on the CiscoSystem2 serial interface. Which of the following commands will you use? A. CISCOSYSTEM2(config-if)# ip address 172.16.17.1 255.255.255.0 B. CISCOSYSTEM2(config-if)# ip address 172.16.18.2 255.255.252.0 C. CISCOSYSTEM2(config-if)# ip address 172.16.18.1 255.255.255.0 D. CISCOSYSTEM2(config-if)# ip address 172.16.17.2 255.255.255.252 Q6. You are a network technician at CiscoSystem, Inc. You add a new workstation to the CiscoSystem network to accommodate a new employee. The relevant section of the CiscoSystem network is shown in the following exhibit: The employee is unable to connect to the server CiscoSystemA at IP address 192.168.10.98/27. Can you identify the incorrectly configured network parameter in the workstation configuration? 3
Background image
iPMAC Networking Academy Here LEADINGto successQ7. Which of the following commands will provide you with information regarding the Layer 3 configuration of directly connected router interfaces? Q8. In a routine check on the state of the network, you discover that the existing copy of the Cisco IOS is outdated and needs to be updated. Which of the following commands would you issue to replace the Cisco router IOS with the newer version? Q9. You are a technician at CiscoSystem. After configuring your router, you find that you cannot ping the directly connected serial port of the neighboring router. The show running-config output displays the word “shutdown” for the serial interface. Which of the following lines will be displayed in the show interface s0 output? A. Serial 0 is down, line protocol is down B. Serial 0 is up, line protocol is down C. Serial 0 is down, line protocol is up D. Serial 0 is administratively down, line protocol is down E. Serial 0 is administratively up, line protocol is down F. Serial 0 is administratively down, line protocol is up Q10. Which of the following pieces of information is displayed by the show host command? (Select two options.) 4
Background image
iPMAC Networking Academy Here LEADINGto success
Background image
Image of page 6

You've reached the end of your free preview.

Want to read all 12 pages?

  • Fall '19
  • IP address, administrator, Network switch, Subnetwork, iPMAC Networking Academy

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

Stuck? We have tutors online 24/7 who can help you get unstuck.
A+ icon
Ask Expert Tutors You can ask You can ask You can ask (will expire )
Answers in as fast as 15 minutes