What should the "SRCH" sequence be set to in the Meridian 1 IE to combat the possibility of "glare"? A. CCW (counter clockwise) B. LIN (linear) C. MIDL (most idle) D. RRB (round robin) Answer: B QUESTION: 73 A multisite Meridian 1 IP Enabled (IE) Option 81C 25.40 system and a Meridian SL-100 system will be interworked. The “DRAT” parameter in the Meridian 1 IE is set to “64KC”. Similarly, the “DCHRATE” and “HDLCTYPE” parameters in the Meridian SL-100 are set to “64K" and "HDLC”. What must the “LCMT” parameter be set to in the Meridian 1 IE to support this functionality? A. AMI B. B8S C. D3 D. D4 E. ESF Answer: B 36
QUESTION: 74 A Meridian 1 IP Enabled (IE) Option 81C 25.40 system and a Meridian SL-100 system are connected via ISDN Primary Rate Interface (PRI) links. During the initial activation, a few links generate these messages: • DTA 018 Frame-slip out-of-service limit • DTA 021 Loss-of-frame-alignment for 3 seconds What should you do? A. Perform a PRI status check. B. Contact the far-end to initiate a loop-back test. C. Check that Meridian 1 IE parameters match the far-end parameters. D. Use the Error Counter to verify the 1.5 Mbps digital transmission from the PRI to each connection. Answer: C QUESTION: 75 During a software upgrade on a Meridian 1 IP Enabled (IE) Option 61C or 81C system, when is it normal for a service interruption? A. Switching to the inactive CPU. B. Running CPU and memory tests. C. Switching to an inactive Network Group. D. Running the software installation program. Answer: A 37
For More exams visit http s ://killexams.com /vendors-exam-list Kill your exam at First Attempt .... Guaranteed!
You've reached the end of your free preview.
Want to read all 6 pages?
- Fall '20
- ITG, Voice over IP