If the respirator is the sole means of protection use a full face supplied air

If the respirator is the sole means of protection use

This preview shows page 5 - 7 out of 9 pages.

If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties a) Appearance Form: clear, liquid Colour: colourless b) Odour No data available c) Odour Threshold No data available d) pH No data available e) Melting point/freezing point Melting point/range: -84 °C (-119 °F) f) Initial boiling point and boiling range 76.5 - 77.5 °C (169.7 - 171.5 °F) g) Flash point -2.99 °C (26.62 °F) - closed cup h) Evaporation rate No data available i) Flammability (solid, gas) May form explosive dust-air mixture. j) Upper/lower flammability or explosive limits Upper explosion limit: 11.5 %(V) Lower explosion limit: 2.2 %(V) k) Vapour pressure 97.3 hPa (73.0 mmHg) at 20.0 °C (68.0 °F) l) Vapour density No data available m) Relative density 0.90 g/cm3 at 20 °C (68 °F) n) Water solubility soluble o) Partition coefficient: n- octanol/water log Pow: 0.73 p) Auto-ignition temperature 427.0 °C (800.6 °F) q) Decomposition temperature No data available r) Viscosity No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information Surface tension 24.0 mN/m at 20.0 °C (68.0 °F) 10. STABILITY AND REACTIVITY 10.1 Reactivity No data available
Image of page 5
Sigma-Aldrich - 270989 Page 6 of 9 10.2 Chemical stability Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions Vapours may form explosive mixture with air. 10.4 Conditions to avoid Heat, flames and sparks. 10.5 Incompatible materials Strong oxidizing agents 10.6 Hazardous decomposition products Other decomposition products - No data available In the event of fire: see section 5 11. TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - 5,620 mg/kg LC50 Inhalation - Mouse - 2 h - 45,000 mg/m3 LD50 Dermal - Rabbit - > 18,000 mg/kg No data available Skin corrosion/irritation May cause skin irritation and/or dermatitis. Serious eye damage/eye irritation No data available Respiratory or skin sensitisation No data available Germ cell mutagenicity No data available Carcinogenicity This product is or contains a component that is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification. IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
Image of page 6
Image of page 7

You've reached the end of your free preview.

Want to read all 9 pages?

  • Spring '17
  • CHAN, Dennis Ho Wai
  • Organic chemistry, Occupational safety and health, St. Louis, Missouri, Flammable liquid, Sigma-Aldrich, Occupational exposure limit, Chemical companies of the United States

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture