When a projector or DVD Home Theater is selected, its volume can be independently controlled.
18 Controlling volume via an amplifier If your TV (or other video device) is connected to an amplifier or DVD Home Theater, you may want to hear the sound from the speakers via your amplifier. In this case, change the factory preset so that you can control the volume of your audio device without switching the controlling device from video to audio each time. To change the factory preset of the volume control SET/SET indicator ´, 5 Device Select buttons Example: To set the DVD Device Select button to control the volume via the amplifier 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the Device Select button for the device you want to control the volume via the amplifier, then release both buttons. The selected Device Select button lights up. 2 Enter ´ - 5 - 5 . The SET indicator flashes three times to indicate that the setting mode has been entered. 3 flashes
1´ Controlling Devices 3 Press the Device Select button to which the connected amplifier is assigned. The SET indicator flashes three times and the indicators turn off. 3 flashes To cancel the process Press SET anytime. To reset the volume control 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the Device Select button you want to reset. 2 Enter ´ - 5 - 5 . The SET indicator flashes three times. ± Press the same Device Select button you pressed in Step 1. The SET indicator flashes three times and the indicators turn off.
20 Teaching the RM- VLZ620 New Functions (Learning Function) If you cannot control a device, even after correctly setting the manufacturer’s code, you can teach the RM-VLZ620 new functions by using the original remote control supplied with the device. You can teach a function to all the buttons (except SET ) for any device mode. To teach the Device Select or SYSTEM CONTROL buttons, see page 24. You may find it useful to write down the functions you have taught. Notes Use new batteries in both remote control units. Certain remote control signals may not be learned. If the function has already been learned, it will be overwritten with the new one. You cannot teach a number button to which you have already assigned a channel (page 27). You can also teach the signals of a computer’s remote control (including a built-in tuner type) to control the monitor. If you do not perform learning steps for 10 seconds at any point during the process, the learning procedure is canceled. SET/SET indicator ´, 8 Device Select buttons Example: To teach a function to the (play) button in DVD mode 1 Place the RM-VLZ620 head to head with your device’s remote control.
You've reached the end of your free preview.
Want to read all 52 pages?
- Fall '16