Begin at privileged configuration mode show pon port

Begin at privileged configuration mode, show PON port optical module parameters as the
following table shows.

EPON OLT CLI User Manual
62
Command Function
Step 1 configure terminal Enter global configuration
mode.
Step 2 interface epon slot/port Enter PON interface
configuration mode.
Step 3 show pon optical transceiver Show pon optical parameters.

EPON OLT CLI User Manual
63
17.ONU Management Configuration
17.1 ONU basic configuration
17.1.1 Configure ONU authentication mode
By default, it is disabled for ONU MAC checking mechanism. All ONU can register freely.
You can use command onu auth-mode mac to enable ONU MAC checking mechanism
when MPCP registering.
Use command onu auth-mode loid to enable ONU LOID authentication mode. After
registered, OLT will request ONU LOID for authentication.
Use command onu auth-mode hybrid to enable hybrid authentication mode. In this mode,
OLT will authenticate ONU by MAC address firstly, if failed, authenticate ONU by LOID.
Use command show onu auth-info to show active ONU information, includes ONU ID,
LLID, ONU status, MAC address, OAM status, distance, last register time, last deregister
time, deregister reason, online time and so on.
Use command show onu auto-find to show inactive ONU information, includes LLID,
MAC address, ONU status, last register time, last deregister time, offline time, and so on.
Begin at privileged configuration mode, configure ONU authentication mode as the
following table shows.
Command Function
Step 1 configure terminal Enter global configuration
mode.
Step 2 interface epon slot/port Enter PON interface
configuration mode.
Step 3 onu auth-mode {disable|mac|loid|
hybrid}
Configure ONU authentication
mode.
Step 4 show onu auth-mode Show ONU authentication
mode.
Step 5 show onu auth-info Show authenticated ONU.
Step 6 show onu auto-find
Show registered but not
authenticated ONU.
17.1.2 Remove authorized ONU
Begin at privileged configuration mode, remove authorized ONU as the following table
shows.
Command Function
Step 1 configure terminal Enter global configuration
mode.

EPON OLT CLI User Manual
64
Step 2 interface epon slot/port Enter PON interface
configuration mode.
Step 3 no onu auth onuid <onuid> Remove authorized ONU.
17.1.3 Deregister or reset ONU
Deregistering ONU only makes ONU off line, but not delete and unauthorized it.
Command Function
Step 1 configure terminal Enter global configuration
mode.
Step 2 interface epon slot/port Enter PON interface
configuration mode.
Step 3a {deregister|reset} onu auth onuid
<onuid>
Deregister or reset specific
ONU.
Step 3b {deregister|reset} onu auth all
Deregister or reset all ONUs.
17.1.4 Configure ONU authorization MAC list
When ONU authorization mode is MAC_auth, you must configure MAC list. Begin at privileged
configuration mode, configure MAC list as the following table shows.