B.The RFID system infrastructure should be ready. C.The RFID system project implementation phase should have been started. D.The RFID system milestones and key metrics should have been identified. Correct Answer:D Section: (none) Explanation Explanation/Reference: Explanation The main prerequisite for creating a blueprint for RFID system is to identify the RFID system milestone and key metrics. The milestone will be dependent on the nature of the business an RFID system is going to compliment to. Reference: RFID Sourcebook QUESTION 84 You are an RFID Engineer. After doing site analysis, you need to implement an RFID system that sends data to a host computer. Which type of interrogator should you use? (INCOMPLETE) A. Serial B. Network C. Interactive D. Autonomous Correct Answer:B Section: (none) Explanation Explanation/Reference: Explanation You need a network interrogator who will send the data to a host computer. You need a network connection between the interrogator and the host computer. A network connection is made through a network card called Ethernet card or interface. The reader and the host computer should be connected to a network through network devices like Ethernet cards and they should use TCP/IP protocols to establish communication and transfer data. Reference: CompTIA RFID+ Exam RFO-001 Study guide from syngress QUESTION 85 What is measured using a spectrum analyzer before deploying an RFID system at a site? A.Antenna power B.RFID system read range C.Coupling system used for communication
