Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP address assigned to it because its IP address may change when using the DHCP function.To expose one PC, select Enable. Then, enter the computer's IP address in the DMZ Host IP Address field.Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. The Administration Tab - ManagementThis section of the Administration tab allows the network’s administrator to manage specific Router functions for access and security.Local Router Access. You can change the Router’s password from here. Enter a new Router password and then type it again in the Re-enter to confirm field to confirm.Remote Router Access. This feature allows you to access the Router from a remote location, via the Internet. Remote Upgrade allows you to upgrade your firmware from a remote location. To enable Remote Upgrade, select Enabled. Remote Administration allows you to manage the Router from a remote location via the Internet. To enable Remote Administration, select Enabled. Enter the Administration Port number you will use to remotely access the Router.UPnP. UPnP allows Windows XP to automatically configure the Gateway for various Internet applications, such as gaming and videoconferencing. When using UPnP features, select Enable. Because allowing this may present a risk to security, this feature is disabled by default. To allow users to make configuration changes, select Enabled. To allow users to disable Internet access, select Enabled.Figure 5-27: Applications and Gaming - DMZFigure 5-28: Administration Tab - ManagementIMPORTANT:Enabling remote Administration allows anyone with access to your password to configure the Router from somewhere else on the Internet.
26Chapter 5: Configuring the Wireless-B Broadband RouterThe Administration Tab - LogWireless-B Broadband RouterTo back up or restore a configuration, click the Backup and Restorebutton and the Backup & Restore Configuration screen will appear. To back up a configuration, click the Backupbutton. To restore a configuration, click the Browsebutton to find the file, then click the Restorebutton.Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. The Administration Tab - LogThe Router can keep logs of all traffic for your Internet connection. To disable the Log function, select No. To monitor traffic between the network and the Internet, select Yes. When you wish to view the logs, click Incoming Logor Outgoing Log, depending on which you wish to view.Logviewer IP Address. Logviewer IP Address uses a logviewer program installed in a PC. Enter the IP Address of the PC running the logviewer. The logviewer program is included on the Setup CD-ROM.