Lab 1 Answers TDC 363 Page 2 3 Static Route Information Enter the information

Lab 1 answers tdc 363 page 2 3 static route

This preview shows page 2 - 8 out of 8 pages.

Lab #1 Answers TDC 363 Page 2 3. Static Route Information Enter the information below for each static route that you must configure so that all 3 subnets are in the routing tables of all 3 routers. This allows any device to ping to any other device. You cannot use any default routes for this assignment. For each static route, enter the Name of the router on which this static route is configured, then the Network Address, Subnet Mask (from Table #1), and the Next Hop IP Address (from Table #2) that should be added to the Routing Table on that router. You can complete this lab with 4 static routes. Table #3: Static Routes Router Name Network Address Subnet Mask Next Hop IP Address R1 192.168.2.0 255.255.255.0 192.168.10.18 R2 192.168.1.0 255.255.255.0 192.168.10.17 R3 192.168.10.16 255.255.255.252 192.168.2.1 R3 192.168.1.0 255.255.255.0 192.168.2.1 4. Lab Screenshots Once you have implemented and tested your network, capture and paste the screenshots indicated below. Note that all screenshots must contain only a single window (not your entire desktop). To get screenshots on Windows, use the Snipping Tool. a. On the Host, execute a ping to 192.168.2.10.
Image of page 2
Lab #1 Answers TDC 363 Page 3 b. On the Host, execute a tracert to 192.168.2.10. c. On NY2 Router (R3) execute a ping to 192.168.1.10. Paste screenshot here.
Image of page 3
Lab #1 Answers TDC 363 Page 4
Image of page 4
Lab #1 Answers TDC 363 Page 5 f. On LA Router (R1) execute a traceroute to 192.168.2.10. g. On NY Router (R2) execute a show ip route .
Image of page 5