Therefore, you can play Xbox online games without a hitch.XBOXRouterInternetLANWANIf necessary, you can follow the steps to change the status of UPnP.1. Visit , and log in with your TP-Link ID or the password you set for the router.2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs.
Chapter 12Customize Your Network SettingsThis chapter guides you on how to configure advanced network features.It contains the following sections:• Change the LAN Settings• Configure to Support IPTV Service• Specify DHCP Server Settings• Set Up a Dynamic DNS Service Account• Create Static Routes• Specify Wireless Settings• Use WPS for Wireless Connection
64Chapter 12Customize Your Network Settings12. 1. Change the LAN SettingsThe router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.1. Visit , and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Maskas the default settings. 4. Click Save. Note:If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features.12. 2. Configure to Support IPTV ServiceConfigure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP).1. Visit , and log in with your TP-Link ID or the password you set for the router.2. Go to Advanced > Network > IPTV.3. If your ISP provides the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK:1 ) Tick the IGMP Proxy checkbox and select the IGMP Version, either V2 or V3, as required by your ISP.I want to:How can I do that?
65Chapter 12Customize Your Network Settings2 ) Click Save.3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the router’s Ethernet port.If IGMP is not the technology your ISP applies to provide IPTV service:1 ) Tick Enable IPTV.2 ) Select the appropriate Mode according to your ISP.• Select Bridge if your ISP is not listed and no other parameters are required.• Select Custom if your ISP is not listed but provides necessary parameters.3 ) After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service.