ANSWER: Storage needs 2.2 times more space (on the data medium) to process a job. Before relocating the system checks the available memory space on the data medium. If there is not enough, the above message is issued. Remedy: Keep the relocation time tight, so that the memory requirement for data to be relocated is low. 11.12.6 Setting up storage with Client-Server Entry ID: 558326 - Date: 09/29/1998 QUESTION: . I use Storage in client-server mode. When I select a network drive I get the message "The archive drive must be prefixed by a UNC name in a multiple station system". What should I do? ANSWER: You must select the drive and "Properties" in the Explorer. In the Release tab under Release > Release name you enter Storage . Using the button Authorization you can view each type of access. If this is not possible, you must log on as Administrator under Windows NT. Then, under the menu item Tools > Connect network drive , you must enter your own computer name and Storage, and then acknowledge. Now, under the specified drive, you can see Storage with the computer name. You must then use this drive as your archiving drive.
Operator Station Process Control System PCS 7, Tips and Tricks 11-158 A5E00080064-01 11.12.7 Storage cannot initialize the drive Entry ID: 71106 - Date: 07/08/1997 QUESTION: Why can’t a newly formatted medium be initialized with "Storage"? ANSWER: If the Storage package cannot initialize a newly formatted drive, the cause might be that Windows has set up a Recycle Bin on that drive. If this is the case, use the Explorer to remove the Recycle Bin from the drive concerned. 11.12.8 At start, Storage issues the message "... started on other computer" Entry ID: 71196 - Date: 02/21/2000 QUESTION: Why does Storage issue the message "... started on other computer" after I have copied a project from one computer to another? ANSWER: You have probably already copied part of the project concerned during the active status, so that still temporary files of Storage have been copied too. Remedy: Delete all *.TMP files in the current project directory. Delete the file "TLSGCS.LCK". 11.12.9 Implementation of Storage in the multistation system Entry ID: 640438 - Date: 11/03/1998 QUESTION: Can you call Storage from the client in multistation systems? ANSWER: Storage must be installed and authorized on the server. On the client it only has to be installed. You do not need authorization on the clients. You can then work with Storage from the client. You can only open Storage on one computer at a time. This means that when you are working with Storage on a client, you cannot open it in addition on the server or another client.
Operator Station Process Control System PCS 7, Tips and Tricks A5E00080064-01 11-159 11.12.10 Storage installation requirements for client/server Entry ID: 640636 - Date: 11/03/1998 QUESTION: Where must the Storage package for a client/server configuration be installed or authorized?
You've reached the end of your free preview.
Want to read all 618 pages?
- Summer '09
- ramana rao
- Control Engineering, WinCC, SIMATIC Manager