9-29-11 Introduction to Multisim

# Procedure i dc circuits in this portion we were asked

This preview shows pages 2–5. Sign up to view the full content.

would take a person considerable time to work out. Procedure I. DC Circuits In this portion, we were asked to build a simple DC circuit, to familiarize ourselves with circuit production and testing in Multisim . Figure 1 shows this circuit, fully built in the program. Figure 1. The circuit built in part I.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
II. DC Simulation For this section, we took the circuit from part I (Fig. 1), and simulated it. Simulation, in this context, means “running” the circuit such that current is allowed to flow through it. Once the circuit has been simulated, one can use probes to analyze it, as shown in Figure 2. Figure 2. The circuit, from part I, simulated and analyzed for part II. III. Dependent Sources In this part, we replaced (Fig. 2) with a dependent current source, dependent upon the voltage going through the resistor . As we wanted the current to be per every Volt going across the resistor, we found . This is shown in Figure 3. Figure 3. The circuit built in parts I and II, instead with a voltage controlled current source (VCCS)
IV. AC Analysis In this procedure, we built an entirely new circuit, except with an AC source instead of DC. With the new power source, we also used two new components, a capacitor as well as an inductor. This circuit is shown in Figure 4, while its oscilloscope output is shown in Figure 5.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

### What students are saying

• As a current student on this bumpy collegiate pathway, I stumbled upon Course Hero, where I can find study resources for nearly all my courses, get online help from tutors 24/7, and even share my old projects, papers, and lecture notes with other students.

Kiran Temple University Fox School of Business ‘17, Course Hero Intern

• I cannot even describe how much Course Hero helped me this summer. It’s truly become something I can always rely on and help me. In the end, I was not only able to survive summer classes, but I was able to thrive thanks to Course Hero.

Dana University of Pennsylvania ‘17, Course Hero Intern

• The ability to access any university’s resources through Course Hero proved invaluable in my case. I was behind on Tulane coursework and actually used UCLA’s materials to help me move forward and get everything together on time.

Jill Tulane University ‘16, Course Hero Intern