With the help of drawing it is possible to create design and at the same time

# With the help of drawing it is possible to create

• 16

This preview shows page 13 - 16 out of 16 pages.

With the help of drawing it is possible to create design and at the same time to produce various part of the concerned design which is known as pattern To transfer the three dimensional surface to a two dimensional drawing paper there are various method existed which are followed by the designer, the common method is develop design is through Mean forme. a) Paper method:- 1. First drawn Centre line on the last, it starts from middle of the toe to the top of the front cone and back curve simultaneously. This help to locate the Centre line the top, the inside featheredge of the last with the help of the concerned paper pattern of insole 2. Put the last on the paper keeping the insides of the last touches the paper, now draw the perimeter of the last by pencil at 90c 3. Draw a line at distance 20mm from the edges of the line at 15mm at the cone 4. Now make two rough copies one for the inside and other is outside of the last 5. Take a copy of the paper and fit it to the last with nail. Care should be taken to so that the paper could be fixed without tension and distance between the nails must be 15- 20mm 13

Subscribe to view the full document.

SLT 2310 Practice of Footwear Design and Fabrication testing B.Sc Leather Technology Dedan kimathi university of Technology Rajakannan 6. Carefully transfer the centre line of the last to your slotted paper at same position , after completing centre line in the same way to transfer the feather edges line, back centre line and also top line. 7. Take off the paper from the last and repeat the system and repeat for the other side of the last. 8. Finally cut both copies exactly along the marked lines on the rough copy. 9. Draw the both copies on a paper and cut the both copies 10. Draw the outside copy on paper and then carefully place inside copy on the outside copy on outside copy. Make the average line [line between the inside and outside] Cut out the mean copy and mark the inside copy along the feather line at the joint area. Preparation of standard & sectional pattern: Construction of men’s oxford shoe-size-8 Measurement are taken, last size 8-fitting Standard length-27.9cm Joint girth-23.9cm Instep girth-24.5cm E Heel height-2.5cm. Heel angle-42.5, and ball angle-105 Reference points and construction lines: AD = height of the heel = 2.5cm, ED = pitch line = 2/3 rd last length, E= joint position Bottom designing Insole is the most vital position in shoe last. Insole is made on the basis of mass collection of foot prints, start point for last and shoe production, is important because of represent the bottom of our feet. There are various method for making sole pattern Method A: - insole pattern for footprint- 14
SLT 2310 Practice of Footwear Design and Fabrication testing B.Sc Leather Technology Dedan kimathi university of Technology Rajakannan In this system at first drawing of foot print on paper. The measurement of the joint girth for the particular foot and also simple method and prepare for insole pattern for chappal and sandal Working procedure:- 1.Place the foot on the paper keeping the body weight on both feet.

Subscribe to view the full document.

• Spring '14
• Onyancha PhD

### What students are saying

• As a current student on this bumpy collegiate pathway, I stumbled upon Course Hero, where I can find study resources for nearly all my courses, get online help from tutors 24/7, and even share my old projects, papers, and lecture notes with other students.

Kiran Temple University Fox School of Business ‘17, Course Hero Intern

• I cannot even describe how much Course Hero helped me this summer. It’s truly become something I can always rely on and help me. In the end, I was not only able to survive summer classes, but I was able to thrive thanks to Course Hero.

Dana University of Pennsylvania ‘17, Course Hero Intern

• The ability to access any university’s resources through Course Hero proved invaluable in my case. I was behind on Tulane coursework and actually used UCLA’s materials to help me move forward and get everything together on time.

Jill Tulane University ‘16, Course Hero Intern

Ask Expert Tutors You can ask You can ask ( soon) You can ask (will expire )
Answers in as fast as 15 minutes