8Bleed screw 12. A typical fixed caliper housing is designed with one caliper piston. 2 piston fixed mount True orFalse: 13.A typical floating caliper housing is designed with one caliper piston.7high pressure inlet AURTTB001 Inspect and service braking systems
14.Complete the following statement about disc brake caliper function using the following words. Words: Bleeder, Bottom, Caliper, Compression, Construction, Cylinder, Dust. Hole, Housing, Inspection, Mechanical, Pressure, Seal Abrake _caliper____ converts hydraulic pressure into _mechanical _________ force. The caliper housing is usually a one-piece _construction___ of cast iron or aluminium and has an _inspection___ hole in the top to allow for lining wear inspection. The __housing___ contains the cylinder bore(s). In the _caliper_________ bore is a groove that seats a square-cut _seal_________. This groove is tapered toward the _bottom_________ of the bore to increase the __pressure________ on the edge of the seal that is nearest hydraulic __pressure________. The top of the cylinder bore is also grooved as a seat for the _dust_________ boot. A fluid inlet __hole________ is machined into the cylinder bore and a _bleeder_________ valve is located near the top of the casting. Assessment 1 – Questioning – WrittenAssessment – AURTTB001 Version: 1.0Created:Feb 2017 Page 11 of 28
