Issue 13162 windows xp right clicking and choose run

This preview shows page 12 - 15 out of 33 pages.

Issue #13162 : Windows XP: Right clicking and choose "run as" may crash the installer. Issue #13226 : Incorrect number of GPIO ports may be displayed for UC3 devices in I/O view. Issue #13517 : The asf.h header file is not included in all examples. Issue #13834 : XMEGA PDI mode on AVR Dragon does not work for the following XMEGA devices''': A3/D3 - rev B Issue #13856 : Code completion doesn't work if tilde (~) precedes the symbol that should be completed. Issue #13858 : Using Chinese letters in file path in programming dialog is not fully supported. Issue #13888 : The programming dialog in AVR Studio 5 does not support readout of OSCCAL and programming of a user- specified value into a specific flash or EEPROM location. Issue #13899 : Mapped network drives do not appear in Project Location window when creating a new project. Issue #14101 : The interface settings has to be verified through "Debugging" project properties page before debug launch, otherwise debug session might fail with incompatible device, tool and interface settings. Issue #14106 : While debugging code on AT90CAN32, AT90CAN64, AT90CAN128 devices it is not possible to view or modify the contents of the CAN mailbox. Issue #14150 :
7
Single stepping code which includes software reset is not supported for Xmega devices. Issue #14186 : Displaying the call stack during debugging is not supported for 8-bit AVR devices. Issue #14193 : Projects which include paths with non-Latin characters are not supported. Issue #14355 : Debugging ATmega128 in ATmega103 compatibility mode is not supported. Issue #14361 : Starting a debug sessions results in a page saying "No source available" in some situations. Program counter is at reset vector. This happens very rarely. To proceed with the debug session, press F5. Issue #14363 : 'Alt + G' does not open the file <avr/io.h>. This file is not parsed by Visual Assist. Issue #14546 : IAR Embedded Workbench projects that are compiled with the normal DLIB option are not supported. Debugging the resulting d90/dbg file in AVR Studio 5 will fail and show "No source available". Issue #15013 : Values of register variables are always evaluated in the context of the most recent call frame. Evaluating register variables in call frames other than the most recent one will therefore display wrong values. Issue #15030 : When debugging optimized code, some variables cannot be evaluated. An example of this is variables whose values are spread across non-consecutive memory locations. Issue #15406 : When using the "start without debugging" function in Studio with the JTAGICE mkII with UC3L or UC3C devices, the device may be halted unintentionally after programming if the RESET line is connected. Toggle power on the target board to resume execution. Issue #15476 : AVRISP mkII: firmware upgrade may fail with the error message "Connection lost, please check and retry". Issue #15492 : Some mega devices have mapped IO displayed as read-only in the memory view when debugging using JTAG.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture