2 type or a login screen displays 3

This preview shows page 131 - 134 out of 170 pages.

2. Type or . A login screen displays. 3. Enter the router user name and password. The user name is admin . The default password is password . The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select Guest Network . 5. Scroll to the Wireless Network (5 GHz 802.11a/n/ac) section of the screen. 6. Select the Enable Video Network check box. 7. Click the Apply button. Your settings are saved.
Image of page 131
Network Settings 132 Nighthawk X4 AC2350 Smart WiFi Router Control the Wireless Radios The router’s internal wireless radios broadcast signals in the 2.4 GHz and 5 GHz range. By default, they are on so that you can connect wirelessly to the router. When the wireless radios are off, you can still use an Ethernet cable for a LAN connection to the router. You can turn the wireless radios on and off with the WiFi On/Off button on the router, or you can log in to the router and enable or disable the wireless radios. If you are close to the router, it might be easier to press its WiFi On/Off button. If you are away from the router or have already logged in it might be easier to enable or disable them. You can also turn the WiFi radios off and on based on a schedule. (See Set Up a Wireless Schedule on page 133.) Use the WiFi On/Off Button To turn the wireless radios off and on with the WiFi On/Off button: Press the WiFi On/Off button on the top of the router for two seconds. If you turned off the wireless radios, the WiFi On/Off LED and the WPS LED turn off. If you turned on the wireless radios, the WiFi On/Off LED and the WPS LED light. Enable or Disable the Wireless Radios If you used the WiFi On/Off button to turn off the wireless radios, you can’t log in to the router to turn them back on. You must press the WiFi On/Off button again for two seconds to turn the wireless radios back on. To enable or disable the wireless radios: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type or . A login screen displays. 3. Enter the router user name and password. The user name is admin . The default password is password . The user name and password are case-sensitive. The BASIC Home screen displays.
Image of page 132
Network Settings 133 Nighthawk X4 AC2350 Smart WiFi Router 4. Select ADVANCED > Advanced Setup > Wireless Settings . 5. In the 2.4 GHz and 5 GHz sections of the screen, select or clear the Enable Wireless Radio check boxes. Clearing these check boxes turns off the WiFi feature of the router for each band. 6. Click the Apply button. If you turned off both wireless radios, the WiFi On/Off LED and the WPS LED turn off. If you turned on the wireless radios, the WiFi On/Off LED and the WPS LED light. Set Up a Wireless Schedule You can turn off the wireless signal from your router at times when you do not need a wireless connection. For example, you might turn it off for the weekend if you leave town.
Image of page 133
Image of page 134

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture