Course Hero Logo

Ivthe channels shall be manufactured to bs 6946 from

Course Hero uses AI to attempt to automatically extract content from documents to surface to you and others so you can study better, e.g., in search results, to enrich docs, and more. This preview shows page 87 - 89 out of 128 pages.

(iv)The Channels shall be manufactured to BS 6946 from 2.5mmmaterials conforming to BSEN10142:2000 and BSEN 10143:2006.(v) The Brackets shall be manufactured to BS6946 from 6mm mildsteel, 40mm wide, hot dip galvanized after manufacture to BSENISO 1461 and shall have a hole size of 14mm dia. to accept M12setscrews(vi)The cable trays shall be capable of carrying without unduedeflection, the total weight of the cables likely to be insertedregardless of the location of the joints.(vii)Ventilated Cable tray covers shall be provided to all external trays andshall be secured using proprietary clips and fixing in accordance withmanufacturers recommendations.(viii)Cables shall be fixed to the trays by means of copper or brass saddlesand clips. All saddles, clips, straps etc. shall be fixed to the trays by means ofbrass screws or bolts or nuts.NB. Steel wire or PVC tie-wraps of any description will not be permitted.(ix)Earth continuity connectors shall be fitted between each length of cable tray toensure compliance with BS 7671PART IVLAPTOP COMPUTER SPECIFICATIONSSupply a rugged branded portable laptop with the following specifications
88OPEN TENDER DOCUMENT FOR GOODS SUPPLY INSTALLATION& COMMISSIONINGBY AND FOR THE KENYA POWER & LIGHTING COMPANY LIMITED6THEDITIONAUGUST 2016(i) Processor i5; RAM 8GB; HDD 320GB; 5400rpm Harddrive. (ii) Carry bag.(iii)OS- Windows 10, fully licensed MS Office installed; Anti-virus. (iv)Wireless, Bluetooth capability.(v) Install the diesel generator configuration software and soft copymanualsif available.(vi)ECM adapter and connection cableelectricity and telephones, water, use and replenishment of all consumables,including those required under the Contract by the Engineer and his staff.Errors will be corrected by the Employer for any arithmetic errors incomputation or summation as follows:Where there is a discrepancy between amount in words and figures, the amountin words will govern; andWhere there is a discrepancy between the unit rate and the total amount derivedfrom the multiplication of the unit price and the quantity, the unit rate as quotedwill govern, unless in the opinion of the Employer, there is an obviously grossmisplacement of the decimal point in the unit price, in which event the totalamount as quoted will govern and the unit rate will be corrected.If a Tenderer does not accept the correction of errors as outlined above, hisTender will be rejected.The Bills of Quantities, unless otherwise expressly stated therein, shall bedeemed to have been prepared in accordance with the principles of the latestedition of the Civil Engineering Standard Method of Measurement (CESMM).Authorized” “Directed”orApproved”shall mean the authority, direction orapproval of the Engineer.Unless otherwise stated, all measurements shall be nettaken on the finished

Upload your study docs or become a

Course Hero member to access this document

Upload your study docs or become a

Course Hero member to access this document

End of preview. Want to read all 128 pages?

Upload your study docs or become a

Course Hero member to access this document

Term
Summer
Professor
N/A
Tags
Call for bids, tender document

Newly uploaded documents

Show More

Newly uploaded documents

Show More

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture