Note • Depending on your security settings, a Windows Security or antivirus software window may appear when using the machine or its software. Please allow or permit the window to continue. • XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from the applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at .
12 Macintosh Wired Network For Wired Network Cable Users for Macintosh (HL-2270DW and HL-2275DW only) 6 Before you install a Make sure your machine is plugged in and your Macintosh is switched ON. You must be logged on with Administrator rights. b Remove the protective cap from the LAN connector. c Connect the network cable to the LAN connector marked with a symbol and then connect it to a free port on your hub. d Make sure the machine power switch is on. 7 Install the printer driver a Put the installation CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. Follow the on-screen instructions. c Follow the on-screen instructions until this screen appears. Choose your machine from the list, and then click OK . IMPORTANT • For the latest drivers and information on the Mac OS X you are using, visit . • For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. Note It may take a few minutes for installation to complete. Note • If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. • You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31 .
13 Macintosh Wired Network Windows ® Macintosh Wired Network d When this screen appears, click Next . Note When the Brother Support screen appears, make your selection and follow the on-screen instructions. Finish The installation is now complete. Note If you use a specified IP Address for the machine, you must set the Boot Method to Static by using the BRAdmin Light. For more information, See Changing your machine’s network settings in the Network User’s Guide .
14 For Wireless Network Users For Wireless Network Interface Users 6 Before you begin First you must configure the wireless network settings of your machine to communicate with your network access point/router. After the machine is configured to communicate with your access point/router, computers on your network will have access to the machine. To use the machine from these computers, you will need to install the printer driver. The following steps will guide you through the configuration and installation process.
- Winter '18
- mr. j
- Macintosh, Wi-Fi, Wireless network