Advanced network options use this option menu to

Advanced
Network Options
Use this option menu to configure advanced iLO network
options, such as DHCP routes, additional Gateway IP
addresses, WINS address, and Domain name.
User
Management
Use this option to add user accounts and edit or remove user
accounts.
Setting Options Use this option to configure iLO access settings, such as
enabling the iLO 4 Configuration Utility, requiring login for the
iLO 4 Configuration Utility, showing the IP address during
POST, and enabling local user access.
Set to factory
defaults
Use this option to reset iLO to the factory default settings.
Reset iLO If iLO is slow to respond, you can use this option to perform
a reset. Resetting iLO does not make any configuration
changes, but it ends all active connections to iLO. You must
have the Configure iLO Settings privilege to reset iLO using
this method.
About Use this option to determine the iLO version.
For more information about these configuration options, see the HP UEFI System Utilities User Guide
for HP ProLiant Gen9 Servers, which is available in the HP Enterprise Information Library .
> To top
Configuration
...
5 de 5
7/2/2017 10:19

iLO 3 RBSU
To access the iLO 3 RBSU console, press F8 during POST. Use the arrow keys and the Enter key to
navigate through the iLO RBSU menus. Follow the on-screen instructions to make configuration
changes.
On servers that use the system RBSU and not the UEFI System Utilities, the iLO option ROM lists
the installed license and the firmware version. This information is not listed in the option ROM on
UEFI systems.
In the iLO 3 RBSU console, select Settings menu to configure Global iLO settings.
In the Global iLO Settings screen, select ENABLED or DISABLED to activate relevant iLO settings.
The table below lists the Settings menu options with their description.
Settings menu
option
Description
Lights-Out
Functionality
Allows you to activate or deactivate iLO
iLO ROM-Based
Setup Utility
Allows you to activate or deactivate RBSU
Require iLO RBSU
Login
Allows you to specify if you want to display the login credentials
prompt for accessing the RBSU console
iLO 3 RBSU
...
1 de 2
7/2/2017 10:27

Remote Keyboard
Model (only for iLO
2)
Allows you to specify the keyboard model for the RBSU console
Show iLO IP during
POST
Allows you to specify if you want to display the current iLO IP
address during the server POST
Two-Factor
Authentication
Allows you to specify if you want the iLO multifactor authentication
functionality
Kerberos
Authentication (only
for supported iLO 3
or iLO 4 servers)
Allows you to specify if you want the Kerberos authentication
Press Ctrl+P to print this page.
iLO 3 RBSU
...