Transport Pin 019s Transport Pin 069s Put the Pin the Hole 066s Put the Pin the

Transport pin 019s transport pin 069s put the pin the

This preview shows page 7 - 13 out of 14 pages.

Transport Pin 0.19s Transport Pin 0.69s Put the Pin the Hole 0.66s Put the Pin the Hole 0.15s Assemble Pin 0.12s Assemble Pin 0.33s Reach for the pin 0.32s Reach for the pin 0.69s Select Pin 0.68s Select Pin 0.61s Get Pin 0.59s Get Pin 0.19s Hold Pin 0.18s Hold Pin 0.20s Transport Pin 0.19s Transport Pin 0.79s Put the Pin in the Hole 0.78s Put the Pin in the Hole 0.14s Assemble Pin in the Hole 0.11s Assemble Pin in the Hole
Image of page 7

Subscribe to view the full document.

Value Adding Activity Reach for the pin Get Pin Transport Pin Put the Pin in the Hole Assemble Pin in the Hole Non-value Adding Activity Hold Pin Select Pin Analysis A. Use of human body The operator must minimize eye focus and travel. The eye must adjust to a change in viewing distance and line-of-sight change. B. Workplace Arrangement The workplace must be properly designed, e.g. working table. The working table must reach more than 38 cm or 15 in from the body’s center to be able for your body to move freely along with your arms. C. Tools and Equipment The tools must be properly designed. The pins must be in the right shape to be able for the operator to easily place it in the hole
Image of page 8
B. Bolt and Washer Assembly Brief Introduction The operator had to assemble the bolt, washer, and nut. Place the first washer on the shaft of the bolt, align the holes for the joint to connect, and push the shaft of the bolt through it. The washer should be pressed between the head of the bolt and the material of the joint. Place the second washer on the shaft of the bolt that is sticking out from the joint. Then, assemble the nut to the shaft of the bolt by twisting clockwise. Hand-lighten the nut so that it is pressed against the washer.
Image of page 9

Subscribe to view the full document.

Layout
Image of page 10
Left and Right Hand Chart MICROMOTION STUDY ANALYSIS SHEET OPERATION : Bolt and Washer Assembly DATE : March 05, 2019 OPERATOR : Carlo Jay Capil Time Symbol Description - Left Hand Time Symbol Description - Right Hand - - Idle 0.75s Reach for the bolt and grasp 1.53s Reach for the lock washer 19.59s Hold 1.83s Assemble lock washer to the bolt - Hold 0.36s Reach for the washer and grasp - Hold 1.43s Assemble lock washer to the bolt - Hold 0.42s Reach for the nut and grasp - Hold 14.02 s Assemble nut to the bolt - Hold Value Adding Activity Reach for the lock washer Assemble lock washer to the bolt Reach for the washer and grasp Assemble lock washer to the bolt Reach for the nut and grasp Assemble nut to the bolt Reach for the bolt and grasp Non-value Adding Activity Hold Bolt
Image of page 11

Subscribe to view the full document.