Answer 100 thermal energy is supplied to the

Answer: _____
100. ____ thermal energy is supplied to the ingredients during the
reaction phase of an endothermic process.
a. Heated
b. Cooled
Answer: _____
101. The reaction time of an endothermic process can be shorted by ____
the temperature of thermal energy applied.
Answer: _____
102. The opposite to the mixing/blending processing method is ____.

Answer: _____
103. Plastics and synthetic materials are typically made from the ____
type of process.
Answer: _____
104. Which process variable should primarily be monitored to prevent
the heating element from becoming too hot and becoming damaged?
a. temperature
b. pressure
c. level
d. product composition
Answer: _____
105. The composition of a product is often affected by changing which
of the following variables?
Answer: _____
106. The term ____ is used to describe how closely a sensor measures
the actual value of a controlled variable.
Answer: _____
107. The ____ characteristic of a sensor refers to when it reaches its
steady output state after responding to a change of the variable it
measures.

Answer: _____
108. Standard electronic ____ signals are capable of being transmitted
a greater distance.
a. current
b. voltage
Answer: _____
109. The information acquired by a recorder is referred to as ____.
Answer: _____
110. ____ control valves are not used for high pressure application.
Answer: _____
111. The ____ valve is recommended for applications where small
pressure drops across its restrictor is desired.
Answer: _____
112. A rule of thumb by many designers is that ____ percent of the
system pressure should be dropped across the valve.
a. 10
b. 25
c. 50
d. 75
Answer: _____

113. When a valve is selected that is sized too large, the controller
of the closed-loop system will cause it to operate at or near the ____
position.