CA 115 cables and the device DIN5 connectors see following figure are limited

Ca 115 cables and the device din5 connectors see

This preview shows page 23 - 26 out of 122 pages.

module’s POWER OUT connector to the next daisy-chained module’s POWER IN connector. CA-115 cables and the device DIN5 connectors (see following figure) are limited to 5 amps at 15 VDC. 3 Return +10 to +30 V 4 +10 to +30 V 1 2 Return 5 No connection DIN 5 Power Pinout* Power is supplied to each optional WBK18 expansion module via a DIN5 connector located on the rear panel of the device. *The DIN5 pinout [to the left] is based on an external view of a rear panel. Note: An optional CA-116 power cable is available. The CA-116 permits the system to be plugged into a vehicle cigarette lighter, allowing use of the vehicle’s battery as a power supply for the device. Calculate system amp load prior to creating a system daisy-chain. The connectors and CA-115 and CA-116 power cables have 5 amp limits, TR-40Us have a 3.33 amp limit. Tables for determining amp load are included in Chapter 11, System Expansion . CA-129 Expansion Control Cables. Control messages are carried by CA-129 expansion-control cables with HD-15, plug and socket connectors. The first expansion unit’s control input is driven from the main unit’s control output. Control inputs of additional WBK modules are driven from the preceding unit’s control output. CA-150 Expansion Signal Cables. Expansion signals are carried by a CA-150-1 male BNC to male BNC coaxial cable. Each WBK module drives a common analog bus that carries the signals to WaveBook’s Analog-to-Digital Converter (ADC). Each WBK module has EXPANSION SIGNAL IN and EXPANSION SIGNAL OUT connectors for daisy-chaining multiple units. CA-242 and CA-242-7 Ethernet Patch Cables. CA-242 is a 1.5 foot cable that can be used to connect a ZonicBook/618E to an Ethernet port on a PC or network. CA-242-7 is a 7-foot cable that can be used for the same purpose. SYNC Ports on ZonicBook/618E are reserved for future use. CA-74-1 and CA-74-5 SYNC Cables. 1-foot and 5-foot cables, respectively, that are used to synchronize multiple devices. SYNC Ports on ZonicBook/618E are reserved for future use. ZonicBook/618E User’s Manual 918995 Connectors, Indicators, and Cables 3-5
Image of page 23
3-6 Connectors, Indicators, and Cables 918995 ZonicBook/618E User’s Manual
Image of page 24
A Brief Look at Software 4 eZ-Analyst Real-Time Vibration & Acoustic Analysis Software …… 4-2 eZ-TOMAS Total Online Monitoring and Analysis Systems Software …… 4-4 eZ-Balance Portable Machine Balancing Software …… 4-6 eZ-Rotate & eZ-RotatePlus Rotating Machinery Vibration Analysis Software …… 4-7 eZ-NDT Non-Destructive Test Software …… 4-9 ZonicBook/618E’s channels are configured using any one of the above named out-of-the-box software packages. Typically, the desired software package is purchased at the time the ZonicBook/618E system is ordered. You can always acquire additional software packages should your acquisition system’s needs change. This chapter provides a glimpse of five software packages that are available for use with ZonicBook/618E.
Image of page 25
Image of page 26

You've reached the end of your free preview.

Want to read all 122 pages?

  • Summer '20

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

Stuck? We have tutors online 24/7 who can help you get unstuck.
A+ icon
Ask Expert Tutors You can ask You can ask You can ask (will expire )
Answers in as fast as 15 minutes