In the select virtual drives window only the one

In the Select Virtual Drives window, only the one virtual disk will be displayed
and checked. Click Next to continue the wizard.
Leave the Create VMware Capability Profile for the Pool check box cleared.
Click Next to continue the wizard.
In the Review Your Selections window, verify that you have a single 9.9 GB
drive in the Extreme Performance Pool. Click Finish.

Page 24 © Copyright 2019 Dell Inc.
Lab Exercise: Storage Provisioning
DEU I&A Lab Guide - Part 1
The Results window displays the creation status.
Close the window when the operation completes.
6. Click the + icon to create another pool. The Create Pool Wizard opens. In the
Name field input: Performance Pool . Click Next to continue the wizard.
In the Assign Tier to the Virtual Drive window, click Next .
In the Select Storage Tiers window, check off the box for Performance Tier .
Click Next to continue the wizard.
In the Select Virtual Drives window , verify Virtual Disk 6 is checked.
Click Next to continue the wizard.
Leave the Create VMware Capability Profile for the Pool check box cleared .
Click Next to continue the wizard.
In the Review Your Selections window, verify that you have a single 19.9 GB
drive in the Performance Pool . Click Finish
The Results window displays the creation status.
Close the window when the operation completes.
7. Click the + icon to create another pool called Capacity Pool . Repeat the
process to add the last 49.9 GB drive (Virtual Disk 9) to the Capacity Pool.
In the Review Your Selections window, verify that you have a single 49.9 GB
drive in the Capacity Pool. Click Finish
The Results window displays the creation status. Close the window when the
operation completes.
All five newly created pools should be listed.

Page 25
© Copyright 2019 Dell Inc.
Lab Exercise: Storage Provisioning
DEU I&A Lab Guide - Part 1
This completes part 1 of the lab exercise.

Page 26 © Copyright 2019 Dell Inc.
Lab Exercise: Storage Provisioning
DEU I&A Lab Guide - Part 1
Creating Block Storage LUNs and Consistency Groups
In this lab, you provision block storage LUNs and a Consistency Group with three
LUNs.
1. In Unisphere, navigate to Storage > Block > LUNs . Click the + icon to create
a new LUN.
The Create LUNs wizard opens.
In the Configure LUN(s) section, input the following configuration:
Number of LUNs: 1
Name: WIN1 LUN0
Pool: FAST VP-1
Tiering Policy: Start High, Then Auto-Tier
Size: 5 GB
Thin : Checked
Host I/O Limit: No Limit
Click Next to continue the wizard.
In the Configure Access section you will not configure host access yet. Click
Next to continue the wizard.
Also click Next in the Snapshot section and Next in the Replication section,
you will not be configuring those features yet.
The Summary section will display the configuration of the LUN to be created
as shown.

Page 27
© Copyright 2019 Dell Inc.
Lab Exercise: Storage Provisioning
DEU I&A Lab Guide - Part 1
Click Finish to begin the creation operation.