B Use the specification sheet to determine its electrical characteristics and

B use the specification sheet to determine its

This preview shows page 3 - 6 out of 12 pages.

B.Use the specification sheet to determine its electrical characteristics and operating values.a.Record the electrical values of the LM386. Absolute Maximum Ratings: Supply Voltage: 15V Package Dissipation: 1.25W Input Voltage: .4V Electrical Characteristics: Operating supply voltage:4-12V Output power:250-325mW Voltage gain:26 dB Bandwidth:300kHz Input Resistance:50kΩ C. Using information from the data sheet or other sources and an application such as Multisim, Visio, or a CAD program draw the schematic and verify the component values of an audio amplifier application using the device. a. Using the Typical Applications section or other source find an amplifier with a gain equal to 20. b. Use an application such as Multisim, Visio, or a CAD program to create the circuit schematic. Label the schematic, LM386 Audio Amplifier . c. Label the pin numbers on the LM386 and give each component a name and value. d. Explain briefly how the gain of the LM386 can be changed.
Image of page 3
D.Construct the audio amplifier on your breadboard with various gains (20 and 200). Using a frequency generator as an input, verify the amplification of the audio amplifier. Use 10mV peak as the input signal and keeping all the component connecting wired as short as possible. Alsokeep all the components close together on the breadboard. b.Complete the table below.
Image of page 4
R C 5 ( ) in pp V ( ) out pp V Expected Measured Gain Gain 1K 10µF 10mV 1.732 _173.2 __149.98_ 1.2 k 10 F 10mV 1.346 _134.6 __95.94__ 2K
Image of page 5
Image of page 6

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture