Type your answers here Step 2 Assign VLANs to the correct switch interfaces a

Type your answers here step 2 assign vlans to the

This preview shows page 4 - 6 out of 8 pages.

Type your answers here. Step 2: Assign VLANs to the correct switch interfaces. a. Assign VLANs to the interfaces on S1. 1) Assign PC-A to the Operation VLAN. S1(config)# interface f0/6 S1(config-if)# switchport mode access S1(config-if)# switchport access vlan 10 2) Move the switch IP address VLAN 99. S1(config)# interface vlan 1 S1(config-if)# no ip address S1(config-if)# interface vlan 99 S1(config-if)# ip address 192.168.1.11 255.255.255.0 S1(config-if)# end b. Issue the show vlan brief command and verify that the VLANs are assigned to the correct interfaces. c. Issue the show ip interface brief command. Question: What is the status of VLAN 99? Explain. Type your answers here. d. Assign PC-B to the Operations VLAN on S2. e. Remove the IP address for VLAN 1 on S2. f. Configure an IP address for VLAN 99 on S2 according to the Addressing Table. g. Use the show vlan brief command to verify that the VLANs are assigned to the correct interfaces. Questions: Is S1 able to ping S2? Explain. Type your answers here. Close configuration window Is PC-A able to ping PC-B? Explain. Type your answers here. Part 3: Maintain VLAN Port Assignments and the VLAN Database In Part 3, you will change VLAN assignments to ports and remove VLANs from the VLAN database. Step 1: Assign a VLAN to multiple interfaces. Open configuration window a. On S1, assign interfaces F0/11 – 24 to VLAN99. S1(config)# interface range f0/11-24 S1(config-if-range)# switchport mode access S1(config-if-range)# switchport access vlan 99 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 8
Image of page 4
Lab - Configure VLANs and Trunking S1(config-if-range)# end b. Issue the show vlan brief command to verify VLAN assignments. c. Reassign F0/11 and F0/21 to VLAN 10. d. Verify that VLAN assignments are correct. Step 2: Remove a VLAN assignment from an interface. a. Use the no switchport access vlan command to remove the VLAN 99 assignment to F0/24. S1(config)# interface f0/24 S1(config-if)# no switchport access vlan S1(config-if)# end b. Verify that the VLAN change was made. Question: Which VLAN is F0/24 now associated with? Type your answers here. Step 3: Remove a VLAN ID from the VLAN database. a. Add VLAN 30 to interface F0/24 without issuing the global VLAN command. S1(config)# interface f0/24 S1(config-if)# switchport access vlan 30 % Access VLAN does not exist. Creating vlan 30 Note : Current switch technology no longer requires that the vlan command be issued to add a VLAN to the database. By assigning an unknown VLAN to a port, the VLAN will be created and added to the VLAN database. b. Verify that the new VLAN is displayed in the VLAN table. Question: What is the default name of VLAN 30? Type your answers here. c. Use the no vlan 30 command to remove VLAN 30 from the VLAN database. S1(config)# no vlan 30 S1(config)# end d. Issue the show vlan brief command. F0/24 was assigned to VLAN 30.
Image of page 5
Image of page 6

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture