Se000 ppp disc received lcp termreq from peer 26265

This preview shows page 16 - 17 out of 17 pages.

We have textbook solutions for you!
The document you are viewing contains questions related to this textbook.
Digital Systems Design Using VHDL
The document you are viewing contains questions related to this textbook.
Chapter 2 / Exercise 2.54
Digital Systems Design Using VHDL
John/Roth
Expert Verified
Se0/0/0 PPP DISC: Received LCP TERMREQ from peer.Jun 20 05:25:26.265: PPP: NET STOP send to AAA..Jun 20 05:25:26.265: Se0/0/0 PPP: Phase is TERMINATING.Jun 20 05:25:26.265: Se0/0/0 LCP: O TERMACK [Open] id 2 len 4.Jun 20 05:25:26.265: Se0/0/0 LCP: Event[Receive TermReq] State[Open to Stopping].Jun 20 05:25:26.265: Se0/0/0 PPP: Sending cstate DOWN notification.Jun 20 05:25:26.265: Se0/0/0 PPP: Processing CstateDown message.Jun 20 05:25:26.265: Se0/0/0 LCP: Event[CLOSE] State[Stopping to Closing].Jun 20 05:25:26.265: Se0/0/0 LCP: Event[DOWN] State[Closing to Initial].Jun 20 05:25:26.265: Se0/0/0 PPP: Phase is DOWNExplain what is causing the link to terminate. Correct the issue and document the command issued to correct the issue in the space provided below.________________________________________________________________________________________________________________________________________________________________________3.d.Issue the undebug allcommand on all routers to turn off debugging.3.e.Verify end-to-end connectivity.Part 9:ReflectionStep 1:What are the indicators that you may have a serial encapsulation mismatch on a serial link?______________________________________________________________________________________________________________________________________________________________________________Step 2:What are the indicators that you may have an authentication mismatch on a serial link?______________________________________________________________________________________________________________________________________________________________________________Part 10:Router Interface Summary TableRouter Interface SummaryRouter ModelEthernet Interface #1Ethernet Interface #2Serial Interface #1Serial Interface #21800Fast Ethernet 0/0 (F0/0)Fast Ethernet 0/1 (F0/1)Serial 0/0/0 (S0/0/0)Serial 0/0/1 (S0/0/1)© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.Page 16 of 17
We have textbook solutions for you!
The document you are viewing contains questions related to this textbook.
Digital Systems Design Using VHDL
The document you are viewing contains questions related to this textbook.
Chapter 2 / Exercise 2.54
Digital Systems Design Using VHDL
John/Roth
Expert Verified
Lab – Configuring Basic PPP with Authentication1900Gigabit Ethernet 0/0 (G0/0)Gigabit Ethernet 0/1 (G0/1)Serial 0/0/0 (S0/0/0)Serial 0/0/1 (S0/0/1)2801Fast Ethernet 0/0 (F0/0)Fast Ethernet 0/1 (F0/1)Serial 0/1/0 (S0/1/0)Serial 0/1/1 (S0/1/1)2811Fast Ethernet 0/0 (F0/0)Fast Ethernet 0/1 (F0/1)Serial 0/0/0 (S0/0/0)Serial 0/0/1 (S0/0/1)2900Gigabit Ethernet 0/0 (G0/0)Gigabit Ethernet 0/1 (G0/1)Serial 0/0/0 (S0/0/0)Serial 0/0/1 (S0/0/1)Note: To find out how the router is configured, look at the interfaces to identify the type of router and how many interfaces the router has. There is no way to effectively list all the combinations of configurations for each router class. This table includes identifiers for the possible combinations of Ethernet and Serial interfaces in the device. The table does not include any other type of interface, even though a specific router may contain one. An example of this might be an ISDN BRI interface. The string in parenthesis is the legal abbreviation that can be used in Cisco IOS commands to represent the interface.© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.Page 17 of 17

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture