Answer: C Explanation: QUESTION NO: 14 Which statement about the local router MAC addresses on RSMLT aggregation switches (cluster) is true? 7
Avaya 6102 Exam A. On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and only used in case of switch failure. B. On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and used for data forwarding. C. On a RSMLT aggregation switch pair, local virtual MAC addresses is exchanged, and used for data forwarding. D. RSMLT aggregation switches are not exchanging local router MAC addresses, but are using the IP destination address to forward traffic. Answer: B Explanation: QUESTION NO: 15 A customer is concerned about the security of their network. They need to understand the OSPF authentication options when accepting route updates in OSPF. Currently, their Virtual Service Platform (VSP) 9000 is configured to require no authentication when receiving the OSPF updates. Which two supported authentication types would provide security on the VSP 9000 for OSPF updates? (Choose two.) A. MD5 B. 3DES C. RADIUS D. Simple Password Answer: A,D Explanation: QUESTION NO: 16 The following ACLI commands are used to set up an MLT on the Virtual Services platform (VSP) 9000 and the last command in this sequence produces an ACLI error. VSP-9012:1 (config) # mlt 1 VSP-9012:1 (config) # mlt 1 name IST VSP-9012:1 (config) # mlt 1 member 3/1, 3/2 VSP-9012:1 (config) # mlt 1 vlan 2, 10, 11, 12 8
Avaya 6102 Exam What should be done to correct the problem? A. Set up the IST on the other VSP 9000 before adding the VLANs. B. Add port members 3/1, 3/2 to each of the VLANs before adding them to the MLT. C. Specify that the MLT is using encapsulation dot1q. D. Assign the IST peer-ip before adding the VLANs. Answer: A Explanation: QUESTION NO: 17 The Chassis Area Network (CAN) uses the SERDES to connect which modules in the Virtual Services Platform (VSP) 9000? A. Switch Fabric cards and I/O cards B. CP curds and Switch Fabric cards C. CP cards and Switch Fabrics in slots 1 & 4 D. All 10 I/O cards, six SF cards and two CP cards E. CP cards and all I/O cards Answer: A Explanation: QUESTION NO: 18 Which statement describes a characteristic of Routed Split Multilink Trunking (RSMLT) configuration? A. RSMLT is only configured on edge SMLT connections. B. RSMLT uses priority values to distinguish between the primary and backup routers. C. RSMLT routers are implemented with the VRF-Lite routers. D. RSMLT is always used in conjunction with routing protocols and SMLT connections. Answer: D Explanation: QUESTION NO: 19 9
You've reached the end of your free preview.
Want to read all 9 pages?
- Fall '18
- IP address, Network switch, Avaya