2 starting system which includes the direct current

This preview shows page 280 - 283 out of 484 pages.

2. Starting System Which includes the direct current motor, drive mechanism and control device, etc. its performance is to start the engine. 3. Lighting system Which includes various lighting lamps inside and outside of the body and their control device; they are used mainly to guarantee safety driving in night. 4. Alarming System Which includes the electric horn, flasher and various service signal indicating lamps, etc. they are mainly used to guarantee the physical and driving safe when driving. 5. Auxiliary Electric Appliance System It includes the electric wiper, air-conditioner, recorder and cigarette lighter, etc. R red R/G red green socket plugging element plug plugging element N 2 3 4 5 6 1 2 3 4 5 S socket plugging element plug plugging element 1. The codes of sockets of socket plugging element are complied from left to right. 2. The codes of sockets of socket plugging element are compiled from right to left. Remark: all of plugging elements are watched from the in- wiring direction. 3. Comparison between plug and socket plugging elements The plug and socket plugging elements are classified accord- ing to their in-built socket shape. (a) All of plugging element are marked according to the opening end and are locked at their tops. (b) When pulling the plugging element, pull the plugging element itself instead of wire. Remark: before pulling the plugging element, check the plugging element that you want to disconnect first to verify their classifications. English letters for wiring colors code: B =black Bl =blue R =red Br =brown Lg =reseda V =purple G =green O =orange W =white Gr =gray P =pink Y =yellow First letter stands for the basic color, while the second for the stripe color. Body Electric System Brief Introduction
BE-3 Body Electric System Brief Introduction pull up pull up press down press down Change of fuse and maxi-fuse Remark: in case of exchanging the fuse or maxi-fuse, the fuse or maxi-fuse with same rated current should be used. Notice: 1. Before exchanging the fuse or maxi-fuse, all electric appliances and ignition switches should be turned off firstly. And the rated current of fuse or maxi-fuse should not be exceeded. 2. When disassembling or assembling the fuse, the disassembly and assembly tools must be used. And they must be pulled out or plugged in vertically. No bend is allowed because the bend will make the connecting terminals depart away, and thus poor connection will occur. In case the fuse or maxi-fuse is burned, it shows there is short circuit. In such situation, the systematic inspection should be conducted by the qualified technician. Remark: the disassembly and assembly tools are put on the protective box cover. same rated current 10A 10A
BE-4 How to make systematic inspection The inspection order is a simple troubleshooting approach, which is used to check and diagnose the failure on vehicle when there is part (wiring and plugging elements excluded) failure in the systematic operation or presupposed system.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture