8.5.5NDT Level II Practical Examination. Proficiency should be demonstrated in selecting and performingthe applicable NDT technique within the method and interpreting and evaluating the results on one ormore specimens or machine problems approved by the NDT Level III. At least ten (10) different check-points requiring an understanding of NDT variables and the employer’s procedural requirements shouldbe included in this practical examination. The candidate should detect all discontinuities and conditionsspecified by the NDT Level III.Note: While it is normal to score the practical on a percentile basis, practical examinations should con-tain check points that failure to successfully complete will result in failure of the examination.8.6Sample questions for general examinations are presented in the separate question booklets that can be obtainedfrom ASNT Headquarters. These questions are intended as examples only and should not be used verbatim forqualification examinations. The following is a list of the booklets: 8.7Additional Written, Specific and Practical Examination Criteria8.7.1NDT Level I, II, and III Written Examinations22.214.171.124All NDT Level I, II, and III written examinations should be closed-book except that necessarydata, such as graphs, tables, specifications, procedures, codes, etc., may be provided with or inthe examination. Questions utilizing such reference materials should require an understandingof the information rather than merely locating the appropriate answer. All questions used forNDT Level I and Level II examinations should be approved by the responsible NDT Level III.Recommended Practice SNT-TC-1A (2011) 5Test MethodQuestion BookletsAcoustic Emission TestingGElectromagnetic TestingE1. Alternating Current Field MeasurementEA2. Eddy CurrentEE3. Remote Field TestingERGround Penetrating RadarGP*Guided Wave TestingGW*Laser Testing1. ProfilometryLP*2. Holography/ShearographyLH*Leak Testing1. Bubble TestHB2. Pressure Change MeasurementHP3. Halogen Diode Leak TestHH4. Mass Spectrometer TestHMLiquid Penetrant TestingDMagnetic Flux Leakage TestingMF*Magnetic Particle TestingBNeutron Radiographic TestingFRadiological Radiographic Testing1. Radiographic TestingA2. Computed Radiography TestingAA*3. Computed Tomography TestingAB*4. Digital Radiography TestingAC*Thermal/Infrared TestingJ*Ultrasonic TestingCVibration AnalysisK*Visual TestingI* In course of preparation DO NOT DISTRIBUTE
126.96.36.199A valid endorsement on an ACCP Level II certificate fulfills the corresponding examinationcriteria described in paragraphs 8.3 and 8.5 for each applicable NDT method.188.8.131.52A valid ASNT NDT Level II certificate may be accepted by the employer’s written practice asfulfilling the General examination criteria described in paragraph 8.3 for each applicablemethod.