AutoSupport alert with UMI code V 475 100 1004 is generated for each storage

Autosupport alert with umi code v 475 100 1004 is

This preview shows page 22 - 24 out of 40 pages.

AutoSupport alert with UMI code V-475-100-1004 is generated for each storagedisk when the storage shelf is turned on. The following message displays:"You can either import the foreign configuration or clear the disk."You can safely ignore these alerts.If you connect the storage shelf during initial configuration, the alerts are allcleared when initial configuration is complete.If you connect the storage shelf after initial configuration, the alerts are clearedwhen you run the storage scan as part of installation. In this case, the NetBackupAppliance Web Console and the NetBackup Appliance Shell Menu may showincorrect data for the storage shelf for approximately five minutes after installationis complete.See theNetBackup Appliance Hardware Installation Guidesfor more informationon installing a storage shelf.22Operational notesGeneral NetBackup Appliance notes
Image of page 22
On a NetBackup 5330 Appliance, once a cable is disconnected, the hardware monitoring status becomes invalid for reference. To avoid this situation, guarantee all cables are connected correctly during the whole cable-monitoring operations. New Copilot feature The following describes the limitations for the 2.7.3 release: The Copilot feature is supported on NetBackup 5230 and 5330 appliances. It is not supported for use with the NetBackup 5220. Copilot functionality is limited to the NetBackup Appliance Shell Menu. There is no NetBackup Appliance Web Console functionality at this time. Client names can be entered using the shortname, the FQDN, or the IP format. These are translated to the FQDN format after entry. When mounting a share on an Oracle server from the appliance using the hostname as well as a private IP (VLAN IP) in a VLAN environment, the following error may be displayed: mount.nfs: access denied by server while mounting hostname:/shares/share This error occurs because entries in the /etc/hosts file are added for mapping the appliance FQDN to VLAN IP addresses. DNS settings are also added to resolve the public addresses, so the DNS settings can take precedence over the /etc/hosts entries. To correct this issue, delete the domain settings by running the following command: Network > DNS Delete Domain . The appliance login banner is not retained after you upgrade the appliance software version. To work around this issue, run the LoginBanner Show command before the upgrade and copy the login banner text. After the upgrade, run the LoginBanner Set command and use the copied text to set the same login banner. An appliance self-test fails if the login banner heading or a single line in the login banner message contains only the following text: ERROR: . If the eth0 port is not configured on your appliance, checkpoint operations do not work from the NetBackup Appliance Web Console. The eth0 port is set as part of the appliance installation, so this issue only applies if you have un-configured it.
Image of page 23
Image of page 24

You've reached the end of your free preview.

Want to read all 40 pages?

  • Fall '19

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture