Methods for Cleaning Up Use appropriate personal protective equipment PPE

Methods for cleaning up use appropriate personal

This preview shows page 2 - 4 out of 7 pages.

Methods for Cleaning Up Use appropriate personal protective equipment (PPE). Contain and/or absorb spill with inert material, then place in suitable container. Prevent runoff from entering drains, sewers or waterways. 6.4. Reference to other sections Use personal protection recommended in Section 8. Section 7: HANDLING AND STORAGE 7.1. Precautions for safe handling _____________________________________________________________________________________________ Issuing Date 23/11/2015 EU CLP REACH Format Revision Date 05/01/2017 Page 2 / 7 Avoid generation of dust and aerosols. Ensure adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing
Image of page 2
_____________________________________________________________________________________ Genencor Catalase BT 88 Product Code A12024 dust or spray mist. Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. Regular cleaning of equipment, work area and clothing is recommended. Avoid contact with eyes, skin and clothing. Wear suitable gloves and eye/face protection. 7.2. Conditions for safe storage, including any incompatibilities Keep container tightly closed in a dry and well-ventilated place. Protect from light. Keep/store only in original container. 7.3. Specific end use(s) See section 1 for more information. Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters Exposure Limits Based on data available for ingredients. DNEL/DMEL - Workers Derived minimal effect level (DMEL) of 60 ng/m 3 for workers and 15 ng/m 3 for consumers has been derived for enzyme proteins DNEL/DMEL - General population Derived minimal effect level (DMEL) of 60 ng/m 3 for workers and 15 ng/m 3 for consumers has been derived for enzyme proteins Predicted No Effect Concentration (PNEC) No data available 8.2. Exposure controls Engineering Measures Transfer via enclosed lines. Formulate in enclosed or ventilated mixing vessels. Carefully handle the substance to minimise releases. Avoid generation of dust and aerosols. Personal protective equipment Eye/Face Protection Wear safety glasses with side shields (or goggles). Hand Protection Use any protective gloves that meet the minimum requirements of EN420 when handling solid product. Gloves meeting the additional requirements of EN374-2 should be worn when handling liquid products. Practical experience has shown that gloves of nitrile rubber, butyl rubber, latex, and polyvinyl chloride (PVC) offer sufficient protection. There are no additional material, thickness and breakthrough time requirements. Chemical resistant gloves, as defined by EN374-3 are not required. Skin and Body Protection Wear protective gloves and protective clothing. Respiratory Protection Ensure adequate ventilation. If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn. Respirators with a particle filter (EN143) or P3 filters are recommended.
Image of page 3
Image of page 4

You've reached the end of your free preview.

Want to read all 7 pages?

  • Winter '20
  • Ode, Occupational safety and health, Material safety data sheet, Chemical safety, Flammability limit, Genencor