B refer to the procedure for removing the disk drives

This preview shows page 17 - 21 out of 33 pages.

b. Refer to the procedure for removing the disk drives and remove the disk drives. Label each disk drive as to its exact location so that it can be re-installed once the chassis is installed in the cabinet. 2. [ ] Manually, or using the portable lift (shown below), align the chassis rails with the inner rails attached to the cabinet. If using a lift, lock the casters into place. Note: If the chassis is being installed manually without a lift, it generally requires three people to install. Two people to hold the chassis in place at the correct height, and one person to align and manage the slides. 3. [ ] Manually slide the inner rail over the chassis rail 2-3 inches to line them up. Figure 1 Sliding the shelf chassis into the rails Note: You may need to release sagging tension on the shelf by pulling the lift arms and tray up slightly. Page 17 of 33
Image of page 17
EMC Confidential Information version: 6.1.6.21 4. [ ] Unlock the casters by lifting up on the locking tabs and carefully slide the shelf into the cabinet as far as the lift will allow. Figure 2 Unlocking the casters 5. [ ] Release the lift casters 6. [ ] Lock all four casters by pressing down on the locking tab so the lift will not roll as the shelf is pushed into the cabinet. Figure 3 Locking the casters 7. [ ] Remove the securing strap by pulling up on the retaining key and pull the ratchet handle upwards as needed. Page 18 of 33
Image of page 18
EMC Confidential Information version: 6.1.6.21 Figure 4 Removing the straps 8. [ ] Carefully push the shelf off the lift arms/tray and into the cabinet. CAUTION: Make sure to leave the lift under the chassis until the shelf is safely balanced and secured within the cabinet. 9. [ ] If the shelf was de-populated prior to installation, re-populate the shelf as follows: a. Re-install the disk drives in the exact location from which they were removed. b. Re-install the Fan modules. c. Slide the shelf into the cabinet. d. From the rear of the cabinet, re-install the power supplies and the LCCs into the shelf. Inserting and securing the top cover and chassis How the chassis is inserted and secured into the cabinet depends upon which configuration of securing mechanism is installed on the shelf. The first configuration has orange self-locking latches above the enclosure latch handles. The second configuration has captive shoulder screws which attach the chassis to the cabinet. 1. [ ] If your shelf has the orange self-locking latches above the enclosure latch handles, proceed as follows: Page 19 of 33
Image of page 19
EMC Confidential Information version: 6.1.6.21 Figure 5 Inserting and securing the chassis to the cabinet a. Using the orange enclosure latch handles, push the shelf completely into the cabinet. Make sure the self-locking latches are pushed in and fully engaged, and the enclosure cannot slide back out of the cabinet.
Image of page 20
Image of page 21

You've reached the end of your free preview.

Want to read all 33 pages?

  • Fall '19
  • 19-inch rack, EMC Corporation, Rack unit, EMC Confidential Information

What students are saying

  • Left Quote Icon

    As a current student on this bumpy collegiate pathway, I stumbled upon Course Hero, where I can find study resources for nearly all my courses, get online help from tutors 24/7, and even share my old projects, papers, and lecture notes with other students.

    Student Picture

    Kiran Temple University Fox School of Business ‘17, Course Hero Intern

  • Left Quote Icon

    I cannot even describe how much Course Hero helped me this summer. It’s truly become something I can always rely on and help me. In the end, I was not only able to survive summer classes, but I was able to thrive thanks to Course Hero.

    Student Picture

    Dana University of Pennsylvania ‘17, Course Hero Intern

  • Left Quote Icon

    The ability to access any university’s resources through Course Hero proved invaluable in my case. I was behind on Tulane coursework and actually used UCLA’s materials to help me move forward and get everything together on time.

    Student Picture

    Jill Tulane University ‘16, Course Hero Intern

Stuck? We have tutors online 24/7 who can help you get unstuck.
A+ icon
Ask Expert Tutors You can ask You can ask You can ask (will expire )
Answers in as fast as 15 minutes
A+ icon
Ask Expert Tutors