Started (German, English, French, Italian) on CD-ROM 6ES7 355-2CH00-0AE0 FM 355-2 S temperature con- troller module With 8 digital outputs for 4 step or pulse controllers Required front connector: 2 x 20-pin Incl. multi-lingual configuration package, manual and Getting Started (German, English, French, Italian) on CD-ROM 6ES7 355-2SH00-0AE0 The following operator panels can be used specially for local opera- tion of the FM 355 C/S: SIMATIC OP17/DP operator panel 6AV3 617-1JC20-0AX1 ■ Selection and Ordering Data Order No. ■ Selection and Ordering Data Order No. FM 350-1 counter module Counting functions up to 500 kHz 1 channel for the connection of 5 V and 24 V incremental encod- ers Required front connector: 1 x 20-pin incl. configuration package on CD-ROM 6ES7 350-1AH03-0AE0 FM 350-2 counter module 8 channels with max. 20 kHz counting frequency, where up to 4 channels are available when used with SIMATIC PCS 7; for 24 V encoders, for the following tasks: counting, frequency measure- ment, speed measurement, period measurement, dosing Required front connector: 1 x 40-pin incl. configuration package on CD-ROM 6ES7 350-2AH00-0AE0 Counter modules
Process I/O Distributed ET 200iSP I/Os Introduction 12/20 Siemens ST PCS 7 · March 2006 12 ■ Overview The ET 200iSP is a modular, intrinsically-safe I/O station in IP30 degree of protection, and can be configured with up to 32 electronics modules (4/8-channel). The range of electronics modules covers: • 8-channel digital input module DI, can also be used as counter or frequency meter • 4-channel digital output module DO • 4-channel analog input modules AI for temperature measure- ments with resistance thermometer or thermocouple • 4-channel analog input modules AI for connection of 2/4-wire transmitters with or without HART functionality • 4-channel analog output module AO for connection of field de- vices with or without HART functionality The ET 200iSP appropriate for gaseous and dusty atmospheres can be installed, according to CENELEC II 2 G (1) GD EEx d e [ib/ia] IIC T4 directly in the Ex zones 1, 2, 21 or 22 as well as in non-hazardous areas. The intrinsically-safe sensors, actuators and HART field devices can also be located in zone 0 or 20 if necessary. ■ Design The ET 200iSP consists of: • a carrier system with terminal modules for prewiring, and also for inserting power supply, interface and electronics modules, mounted on an S7-300 rail, • 1 or 2 (redundant) power supply modules PS with pressurized enclosure, • 1 or 2 (redundant) IM 152 interface modules for PROFIBUS DP, • up to 32 electronics modules (4/8-channel) in any combina- tion, and • a terminating module (included in scope of delivery of terminal modules for the PROFIBUS interface). Assembly is quick and easy: • Latching of terminal modules onto the S7-300 rail • Prewiring of process signal cables on the terminal modules using spring-loaded or screw-type connections • Plugging-in of power supply, interface and electronics mod- ules without the need for additional tools.
- Summer '18
- Dr. Abraraw
- Nature, SIMATIC