Circuit operation is done with use of simulation

This preview shows page 2 - 5 out of 9 pages.

circuit operation is done with use of simulation software’s Word Generator and Logic Analyzer. Knowledge of timers and counters will be necessary to follow and complete all lab portions. Method and Procedure 1. Circuit F11-06 Refer to Example 11-1 in your text. Observe the operation of a 5-bit Register. In this lab the MultiSim Logic Analyzer is already connected for you. There is also a Word Generator connected as the input. The word generator sends digital words or patterns of bits into circuits to provide stimulus to digital circuits.
Results and Figures : The High bit input into 1 st register in sequence, the bit is shifted from left to right as the remaining bits are entered and shifted while following the 1 st registers output to 2 nd registers input bit. Related Problem
The 1st clock pulse on logic analyzer, all D_FF outputs are reset. After the 5th clock pulse inverted input on initial D_FF causes following ripple effect to additional D_FF in sequence: MSB (Q4) → LSB (Q0) Method and Procedure Circuit F11-12 Observe the operation of a 4-bit Parallel In/Serial Out Register. In this lab the MultiSim Logic Analyzer is already connected for you. There is also a Word Generator connected as the input. The word generator sends digital words or patterns of bits into circuits to provide stimulus to digital circuits.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture