10 The firmware is bundled with the CAM software download package Download the

10 the firmware is bundled with the cam software

This preview shows page 7 - 10 out of 34 pages.

Storage Common Array Manager (CAM), Version 6.10. The firmware is bundled with the CAM software download package. Download the latest version of CAM as described in the Sun Storage Common Array Manager Release Notes, Version 6.10 . Before you perform an online controller firmware upgrade, read the article “Recommended Settings for the fcp_offline_delay Variable When Upgrading a Sun Storage 6000, 2500, or 2500-M2 Controller Firmware“ (Doc ID 1569976.1) located on MOS. This article describes how to modify fibre channel timeout values for Solaris SPARC and x86 hosts. Note – Each array should be managed by one CAM management host only. Installing the management software on more than one host to manage the same array can cause discrepancies in the information reported by CAM.
Image of page 7
4 Sun Storage 2500-M2 Arrays Hardware Release Notes June 2014 Supported Disk Drives and Tray Capacity See Hardware Specifications in the Oracle System Handbook for the latest disk drive information: _M2.html _M2.html Array Expansion Module Support The Sun Storage 2530-M2 and 2540-M2 arrays can be expanded by adding Sun Storage 2501-M2 array expansion trays. To add capacity to an array, refer to the following Service Advisor procedures: Adding Expansion Trays Upgrade Firmware Caution – To add trays with existing stored data, contact My Oracle Support for assistance to avoid data loss. Data Host Requirements “Multipathing Software” on page 5 “Supported Host Bus Adaptors (HBAs)” on page 6 “Supported FC and Multilayer Switches” on page 8 TABLE 1 IOM Code for Sun Storage 2501-M2 Expansion Tray Array Controller Firmware Supported Expansion Tray IOM Code Sun Storage 2500-M2 07.84.53.10 2501-M2 * * Only 2501-M2 expansion trays are supported with a 2500-M2 controller tray 0366
Image of page 8
Sun Storage 2500-M2 Arrays Hardware Release Notes 5 Multipathing Software You must install multipathing software on each data host that communicates with the Sun Storage 2500-M2 arrays. Download the latest RDAC/MPP or MPIO failover driver from MOS. You can link to the failover drivers and get additional multipathing information from the following documents: Sun Storage 2540-M2 Multipath Software Compatibility Matrix (Doc ID 1508701.1) 1508701.1 Sun Storage 2530-M2 Multipath Software Compatibility Matrix (Doc ID 1509474.1) 1509474.1 MPxIO driver is included with the Solaris OS Note – Single path data connections are not recommended. For more information, see “Single Path Data Connections” on page 13 . TABLE 2 Supported Data Host OS and Multipathing Software Operating System Multipathing Software Solaris 11 (initial) MPxIO Solaris 11 ALUA/TPGS MPxIO (TPGS) Solaris 10u5 (minimum * ) MPxIO Oracle Linux 6.5, 6.4, 6.3, 6.2, 6.1, 6.0 Oracle Linux 5.9, 5.8, 5.7, 5.6, 5.5 RDAC or DMMP RDAC Oracle Unbreakable Linux Oracle Unbreakable Linux 2 DMMP Oracle VM 3.1.1 DMMP Oracle VM 2.2.2 RDAC RHEL 6.5, 6.4, 6.3, 6.2, 6.1, 6.0 RHEL 5.9, 5.8, 5.8, 5.7, 5.6, 5.5 RDAC or DMMP RDAC SLES 10.4, 10.3, 10.2, 10.1, 10.0 SLES 11.3, 11.2, 11.1, 11.0 RDAC or MPP
Image of page 9
Image of page 10

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture