Table of Contents
Objectives 3
Equipments 3
Results
4
Conclusion 9
1
Objectives
After completing this lab, we should've learned a few basic concepts. Here are the
concepts:
1. Get used to the layout of the breadboard.
2. Understand how to read and use the

Table of Contents
Objectives 3
Equipments 3
Results
4
Questions 10
Conclusion 13
1
Objective:
After completing this lab, we should've learned a few basic concepts. Here are the
concepts:
1. Assemble series and parallel circuits on the breadboard
2. Verify

Table of Contents
Objectives 3
Equipments 3
Results 4
Conclusion 8
1
Objective:
After completing this lab, we should've learned how to use a few new equipments.
Here are some of the equipment we should be familiar with:
1. Determine the dc bias currents a

Table of Contents
Objectives 3
Equipments 3
Results 4
Conclusion 10
1
Objective:
After completing this lab, we should've learned how to use a few new concepts.
Here are some of the concepts we should be familiar with:
1. Calculate and measure the RC Time

Objective:
After completing this lab, we should've learned a few methods and theorems that help us
determine resistance, voltage, current, etc. Here are the methods and theorems :
1. Apply and verify the Node Voltage method
2. Apply and verify the Mesh Cu

Objective:
After completing this lab, we should be able to:
1. Verify voltage divider rule
2. Verify current divider rule
3. Analyze series-parallel circuits
Theory:
By the end of this lab we should be able to use the breadboard to build a combination ser

Objective
In this project we need to design and test a controller by switching the systems with
appropriate delay.
In the system, Red LED must turn on in the beginning of the experiment while the
other two remain off. After 2 sec the Green LED turn on. Af

NYIT
ELECTRICAL & COMPUTER ENGINEERING
Spring 2017 EENG 315 M01, Professor: Michael Makdisi
Experiment 7: Op.Amp Applications
Peter & Tarek Agag
Experiment date: 3/9/2017
Date of Submission: 3/16/2017
Objective of your Experiment:
1. To Analyze and unders

Table of Contents
Objectives 3
Equipments 3
Results 4
Questions
Conclusion
1
Objective:
After completing this lab, we should've learned a few methods and theorems that
help us determine resistance, voltage, current, etc. Here are the methods and
theorems

Table of Contents
Objectives 3
Equipments 3
Results
Questions
Conclusion
1
Objective:
After completing this lab, we should've learned a few basic concepts. Here are the
concepts:
1. Verify voltage divider rule
2. Verify current divider rule
3. Analyze and

Table of Contents
Objectives 3
Equipments 3
Results 4
Conclusion 9
1
Objective:
After completing this lab, we should've learned how to use a few new concepts.
Here are some of the concepts we should be familiar with:
1. Be familiar with and analyze an ast

Table of Contents
Objectives 3
Equipments 3
Results 4
Conclusion 10
1
Objective:
After completing this lab, we should've learned how to use a few new concepts.
Here are some of the concepts we should be familiar with:
1. To measure voltage, current relati

Table of Contents
Objectives 3
Equipments 3
Results 4
Conclusion 17
1
Objective:
After completing this lab, we should've learned how to use a few new concepts.
Here are some of the concepts we should be familiar with:
1. To analyze a half-wave rectifier c

Table of Contents
Objectives 3
Equipments 3
Results 4
Questions 12
Conclusion 13
1
Objective:
After completing this lab, we should've learned how to use a few new equipments.
Here are some of the equipment we should be familiar with:
1. The function gener

Objective:
After completing this lab, we should've learned a few basic concepts. Here are the concepts:
1. Learn to set up series and parallel circuits on the breadboard
2. Verify equations for computing equivalent resistance
3. Verify Kirchhoff's Voltage