Pressing the start button makes getting a signal to the solenoid (S1) which makes reposition the
directional valve (1), which is given fluid to the cylinder to making this out to claim the piece .
The cylinder A to reach its limit a1, sends
In units of biological maturation process begun in the previous stages of treatment continues,
remove remaining contamination of the above processes and evacuate the waters of the river.
The characteristics of the slopes and spillway are
General characteristics of the plant.
Plant wastewater treatment stage, it is constituted by a preliminary treatment structure and two
independent modules treatment, preliminary treatment area consists of:
Condition short circuit protection I:
Means that the intensity of the fuse in 5 seconds, must be less than the strength enduring the
driver to a short circuit lasts 5 seconds occur. If not met, the section must be raised.
This secures that when the fuse 5
In the industry we find several processes which must be considered at every moment operators
of the various machines. This is a risky way towards workers because in case of any emergency
with the machine it is they who are more coming to them
Number of poles of the generator.
Table 3.6 Table of the number of poles of the generators to be installed on the ground
Table have the number of poles of the generators chosen with the criterion that induction
generators need to work rotational speed of
State Diagram Explanation
It begins in the state E0 which is awaiting the drive, when operating the PM (commissioning)
spent the next state E1 which handles the cylinder outlet A. To advance the state E2 must be
limit switch actuated a1, when this occurs
Selection criteria transformer
Voltage level of primary and secondary
Installation type, weatherproof cabin PADMOUND.
TRIFSICOS connection type single phase system.
Construction features (refrigerant, insulation, installation type)
Pump with engines
'Design of one system oleohidrulico'
The pump is responsible for delivering the fluid to the system. Pump transforms the mechanical
energy of the motor into hydraulic energy. This transformation is performed in two stages.
Suction and co
All products arise from a need, a problem or a desire. These products do not start to materialize
until the design activity does not start. In this process the product characteristics are defined
and taken into count multiple factors relate