All-in-1 / CISSP All-in-One Exam Guide, 5th Ed. / Harris / 160217-8
Once software code is compiled, shrink-wrapped, and shipped to the far ends of the
earth, there are only so many approach
EIGRP & OSPF Practice Questions
1. What are the necessary conditions that need to be satisfied to establish EIGRP neighbor
relationship in a frame-relay network over point-to-multipoint sub-interfaces?
When configuring EIGRP over point-to-multipoint subin
Chapter 6 Lab 6-1, Configure NAT Services
Configure dynamic NAT and static NAT on the HQ router.
Configure dynamic NAT on the Branch router.
Verify the configuration and operation using show commands.
2014 Cisco and/or it
Chapter 5 Lab 5-2, Configure IP SLA Tracking and Path Control
Configure and verify the IP SLA feature.
Test the IP SLA tracking feature.
Verify the configuration and operation using show and debug commands.
Chapter 1 Lab 1-1, Basic RIPng and Default Gateway Configuration
Configure IPv6 addressing.
Configure and verify RIPng on R1 and R2.
Configure IPv6 static routes between R2 and R3.
Propagate a default route using RIPng.
Chapter 4 Lab 4-1, Redistribution between EIGRP and OSPF
Review EIGRP and OSPF configuration.
Summarize routes in EIGRP.
Summarize in OSPF at an ABR.
Redistribute into EIGRP.
Redistribute into OSPF.
Summarize in OSPF at an
Switching Features and
Technologies for the Campus
CCNP SWITCH: Implementing Cisco IP Switched Networks
SWITCH v7 Chapter 8
2007 2016, Cisco Systems, Inc. All rights reserved.
Chapter 8 Objectives
This chapter covers the following