Using DSV/EIT Lab Computers
In order to use AutoCAD you need: 2. 3. Login using your LAB username and Password After windows is completely loaded, you will find AutoCAD icon on your desktop.
In the principal orthographic views, the hidden features are generally shown by
hidden lines. When the object contains complex internal features, the hidden lines
describing these features can get confusing. To clarify the internal features
1. Use the following figure with PLINE. Remember that the dimensions are always part of your drawing now, unless
First, create the 15.50 x 17.50 polyline frame as shown.
Draw 0 width 15.50 x 13.50 polyline rectangle and the
Please change the drawing unit to architectural and draw the following figures.
1. Draw the chair and table in seperatre file and use external reference (XREF) to complete the figure as shown
below. Also, give the dimensions.
2. Draw the chai
Create the template and layers with the following settings and use it for classwork and homework. Assume any missing
Create a table style named Parts List with the following settings:
Drawing the line
Command: Line or L
The Close option- it is used to join the current point to the start point of the first line when two or more continuous lines
The Undo option- it is used to remove the wrong lines. It can be use multiple tim
As discussed earlier, most object generally required three principal views( Front view, side view, and top view) to show
all features of the object. Round objects may require just two vies. Some objects have inclined surfaces. It may not be
HW 2-1. Draw the sketch as shown below. The distance between the dotted lines is 1 unit.
HW 2-2. Draw the sketch as shown below. The distance between the dotted lines is 1 unit.
HW 2-3. Draw the sketch as shown below. The distance between the dotted lines
The TEXT command lets you write several lines of text on the drawing. After invoking this command you have to specify the start point for the text. Then you need to specify the height of the text and also the rotation angl
Creating a Selection Set
Last Previous WPolygon CPolygon Remove Add ALL Fence Group BOX AUto Multiple Undo Single
The point is the basic drawing object. Point
Drafting Settings Dialog Box
You can use the Drafting Settings dialog box to set drawing modes such as grid, snap, Object Snap, Polar, and Object snap tracking. You can right-click on the Snap, Grid, Polar, Osnap, or Otrack butt
Layer Properties Manager Dialog Box
You can use the Layer Properties Manager dialog box to perform the functions associated with the LAYER command. For example, you can create new layers, assign colors, assign linetypes, or perform any o
- Prism pole
1. We set up the tripod and total station on an area and leveled it.
2. One member of our group had to hold the prism rod in front of the total station but at
different angles around it. The prism
1) Set up total station at first traverse point (benchmark).
2) One member had to hold one prism pole on the last point in the traverse and the other on
traverse No.2 and then back sight the setup to the last point.
3) We recorded the initial h
Pacing Lab Report
Introduction: The objective of the pacing lab was to determine the length of each
persons natural pace by counting the number of steps we take so we can estimate the
distance of a field. This method is useful when a person wants to draw
Multiview drawings are also known as orthographic projection
The purpose of a Multiview Drawing is to represent a three
dimensional object on a two dimensional sheet of paper or in a two
dimensional drawing space.