ICND1 Basic Questions 2
Which two options will help to solve the problem of a network that is suffering a broadcast storm?
A. a bridge
B. a router
C. a hub
D. a Layer 3 switch
E. an access point
Answer: B D
Only a route
Because of the size of the notebook 50 Mbs) the person downloading the document will see a OneNote
is not responding window pop up during the download. Thats to be expected because of the documents
size. I would let the screen sit for at least 8-10 minute
ICND1 Basic Questions
Which two statements describe the operation of the CSMA/CD access method? (Choose two)
A. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.
B. In a CSMA/CD collision domain, st
ICND2 Drag and Drop
Two offices are displayed below
You work as a network technician at 9tut. Study the exhibit carefully. The company has a main office
in Los Angeles and a satellite office in Boston. The offices are connected through two Cisc
ICND2 Drag and Drop 2
Match the categories with the appropriate router output lines.
Port operational: Serial0/1 is up, line protocol is up
Layer 2 problem: Serial0/1 is up, line protocol is down
Layer 1 problem: Serial0/1 i
OSPF Neighbor Sim
We dont have enough information about this sim to make a complete solution but here is some
information from the candidates about this sim so far:
I was talking about the ICND1 (100-101) exam. The 6 routers are configured with
What is the subnet address for the IP address 172.19.20.23/28?
From the /28 we can find all information we need:
ICND1 Router Questions
Which two of these functions do routers perform on packets? (Choose two)
A. examine the Layer 2 headers of inbound packets and use that information to determine the next
hops for the packets
B. update the Layer 2 headers
Frame Relay Sim
Enter IOS commands on the Dubai router to verify network operation and answer four multiple-choice
questions. THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To answer 4 questions below, you have to type show frame-relay map and
Mastering Binary Math
Cisco certification candidates, from the CCNA to the CCIE, must master binary math. This
includes basic conversions, such as binary-to-decimal and decimal-to-binary, as well as more
advanced scenarios involving subnetting and VLSM.
ICND1 IP Routing
What is the best practice when assigning IP addresses in a small office of six hosts?
A. Use a DHCP server that is located at the headquarters.
B. Use a DHCP server that is located at the branch office.
C. Assign the addresses
What are the benefit of using Netflow? (Choose three)
A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
Answer: A C D
NetFlow traditionally enables several key cus
What does a router do if it has no EIGRP feasible successor route to a destination network and the
successor route to that destination network is in active status?
A. It routes all traffic that is addressed to the destination networ
ICND1 OSPF Hotspot
This item contains several questions that you must answer. You can view these questions by clicking
on the corresponding button to the left. Changing questions can be accomplished by clicking the
numbers to the left of each que
ICND1 Security Questions
An administrator has connected devices to a switch and, for security reasons, wants the dynamically
learned MAC addresses from the address table added to the running configuration. What must be done
to accomplish this?
How to use SDM to set up NAT
Most of the NAT and PAT deployments currently in use were configured at the
CLI, and you'll learn how to do that in your CCNA studies. In the following lab,
we're going to use a relatively new method, the Security Device Manag
Central Florida Widgets recently installed a new router in their Apopka office. Complete the network
installation by performing the initial router configurations and configuring RIPv2 routing using the
router command line interface (CL
ICND1 IP Routing 2
Refer to the exhibit. Mary is sending an instant message to Robert. The message will be broken into a
series of packets that will traverse all network devices. What addresses will populate these packets as
they are forwarded
Show Configuration Sim
This task requires the use of various show commands from the CLI of Router1 to answer 5 multiplechoice questions. This does not require any configuration.
NOTE: The show running-configuration and the show startup-configuration comma
ICND2 Frame Relay 2
The command show frame-relay map gives the following output:
Serial 0 (up): ip 192.168.151.4 dlci 122, dynamic, broadcast, status defined, active
Which statements represent what is shown? (Choose three)
A. 192.168.151.4 repr
ICND2 Frame Relay
What can be done to Frame Relay to resolve split-horizon issues?(Choose two)
A. Disable Inverse ARP.
B. Create a full-mesh topology.
C. Develop multipoint subinterfaces.
D. Configure point-to-point subinterfaces.
E. Remove the
What happens when computers on a private network attempt to connect to the Internet through a
Cisco router running PAT?
A. The router uses the same IP address but a different TCP source port number for each connection.
B. An IP ad
The Internet protocols are the worlds most popular open-system (nonproprietary) protocol suite
because they can be used to communicate across any set of interconnected networks and are equally
well suited for LAN
This chapter describes how to configure the Interior Gateway Routing Protocol (IGRP). For a
complete description of the IGRP commands in this chapter, refer to the IGRP Commands chapter
of the Network Protocols Command Reference, Part 1.
ICND2 OSPF Questions 2
Which command is used to display the collection of OSPF link states?
A. show ip ospf link-state
B. show ip ospf Isa database
C. show ip ospf neighbors
D. show ip ospf database
The output of the show
Refer to the exhibit. What three actions will the switch take when a frame with an unknown source
MAC address arrives at the interface? (Select three)
A. Send an SNMP trap.
B. Send a syslog message.
C. Increment the Security Viol
Implementation SIM 2
This topology contains 3 routers and 1 switch. Complete the topology.
Drag the appropriate device icons to the labeled Device
Drag the appropriate connections to the locations labeled Connections.
Drag the appropriate IP addresses to
ICND2 IP Routing
Which two are advantages of static routing when compared to dynamic routing? (choose two)
A. Security increases because only the network administrator may change the routing tables.
B. Configuration complexity decreases as netw
ICND2 Drag and Drop 3
Drag item on left to match item on right
+ Point to Point Advantage: Quality
+ Point to Point Disadvantage: Limited Flexibility
+ Circuit Switched Advantage: Cost
+ Circuit Switched Disadvantage: Low speed
ICND1 OSI Model
Which OSI layer header contains the address of a destination host that is on another network?
E. data link
At which layer of the OSI model does t
ICND2 IPv6 Questions
Which command enables IPv6 forwarding on a Cisco router?
A. ipv6 local
B. ipv6 host
C. ipv6 unicast-routing
D. ipv6 neighbor
An example of configuring RIPng (similar to RIPv2 but is used for IPv6) is s
You have been hired by PC Consultants Incorporated to document the layout of the network. Complete
the following tasks:
Complete the network topology shown in the graphic by dragging the labels below with the