Mechanics of Deformables Spring 2007 Homework 8 Solution
8.1 The open-ended polyvinyl chloride pipe has an inner diameter of 4 in. and thickness of 0.2 in. It carries flowing water at 60 psi pressure. If the flow of water within the pipe is stopped d

Mechanics of Deformables Spring 2007 Homework 6 (Due Thursday 03/08/2007)
6.1 Draw the shear and moment diagrams for the shaft and determine the shear and moment throughout the shaft as a function of x. The bearings at A and B exert only vertical rea

EGRM 204 Thermodynamics
Spring 2015
McLeskey
Homework Assignment #7
Due Wednesday March 25, 2015, at 4:00 pm in Engineering East Building E3252 (or may be
turned in during class)
Late Homework will NOT be accepted
All Problems are from Cengel and Boles, 7

EGRM 204 Thermodynamics
Spring 2015
McLeskey
Homework Assignment #8
Due Friday April 3, 2015, at 4:00 pm in Engineering East Building E3252 (or may be turned in
during class)
Late Homework will NOT be accepted
All Problems are from Cengel and Boles, 7th e

EGRM 204 Thermodynamics
Spring 2014
McLeskey
Homework Assignment #9
Due Friday April 11, 2014, at 4:00 pm in Engineering East Building E3238 (or may be turned in
during class)
Late Homework will NOT be accepted
All Problems are from Cengel and Boles, 7th

EGRM 202, HW#2, Posted on 2/2, Due on 2/9 by 4pm (late HW will NOT be accepted).
- There are 6 problems.
- Use green engineering paper and pencil.
- Box all final answers.
- Neatness counts.
Problem 1)
The 4 mm-diameter cable BC is made of a steel with E=

Name: _, Student ID: _
EGRM 202, Quiz #1, Given time: 15 min.
- There are 2 problems.
- Use green engineering paper and pencil.
- Box your answers.
- Open book and open note.
Problem 1)
The wooden members A and B are to be joined by plates, which
will be

EGRM 202, HW#1, Posted on 1/21, Due on 1/28 by 4pm (late HW will NOT be accepted).
- There are 7 problems.
- Use green engineering paper and pencil.
- Box all final answers.
- Neatness counts.
Problem 1)
The shaft is supported by a smooth thrust bearing a

Mechanics of Deformables Spring 2007 Homework 7 (Due Tuesday 03/27/2007)
7.1 Determine the maximum shear stress in the strut if it is subjected to a shear force of V = 20 kN.
7.2 Determine the largest end forces P that the member support if the allo

Mechanics of Deformables Spring 2007 Homework 2 Solutions
2.1 The 50-lb lamp is supported by two steel rods connected by a ring at A. Determine which rod is subjected to the greater average normal stress and compute its value. Take = 60.The diameter

Mechanics of Deformables Spring 2007
Homework 4 (Due Tuesday 02/130007)
4.1 The ship is pushed through the water using an A-36 steel propeller shaft
that is 8 m long, measured from the propeller to the thrust bearing D at the
engine. If it has an outer d

Mechanics of Deformables Spring 2007 Homework 5 solutions (Due Thursday 03/01/2007)
5.1 The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. If it is tightly secured to the wall at C and it is subjected to the uniformly

Mechanics of Deformables Spring 2007 Homework 10 (Due Tuesday 04/17/2007)
10.1 Determine the equation of the elastic curve for the beam using the x coordinate that is valid for 0 x L/2. Specify the slope at A and the beam's maximum deflection. EI i

Mechanics of Deformables Spring 2007 Homework 9 Solution
9.1 Determine the stress components acting on the inclined plane AB using stress-transformation equations.
9.2 The internal loadings at a section of the beam consist of an axial force of 6 kip